Product Information

• Actual Length (in): 47.780
• Life at 3 hrs./start on IS ballasts: 24000
• Base: Medium Bipin
• Average Rated Life (hr): 30000
• Initial Lumens at 25C: 2950
• Nominal Wattage (W): 32.00
• Mean Lumens at 25C: 2775
• Nominal Length (mm): 1219.20
• Nominal Length (in): 48.000
• Abbrev. With Packaging Info.: FO32841ECO 30/CS 1/SKU
• Actual Length (mm): 1213.61
• Color Temperature/CCT (K): 4100
• Family Brand Name: OCTRON® 800, ECOLOGIC®
• Life at 12 hrs./start on PRS ballasts: 36000
• Industry Standards: ANSI C78.81 - 2001
• Bulb: T8
• Diameter (in): 1.098
• Life at 3 hrs./start on PRS ballasts: 30000
• Color Rendering Index (CRI): 85
• Life at 12 hrs./start on IS ballasts: 30000
• Diameter (mm): 27.90

Additional Product Information

Packaging Information

Product Documents, Graphs, and Images

Footnotes

• The 30,000 hour average rated life of OCTRON® 800 Series lamps is baseon operation at 3 hours per start on a QUICKTRONIC® programmed rapid start ballast. Average rated life is 36,000 hours at 12 hours per start on a programmed rapid startballast. On an instart start ballast, the average rated life is 30,000 hours at 12 hours per start, and 24,000 hours at 3 hours per start.
• Minimum starting temperature is a function of the ballast; consult the ballast manufacturer.
• SYLVANIA ECOLOGIC fluorescent lamps are designed to pass the Federal Toxic Characteristic Leaching Procedure (TCLP) criteria for classification as non-hazardous waste in most states. TCLP test results are available upon request. Lamp disposal regulations may vary, check your local & state regulations. For more information, please visit www.lamprecycle.org
• OCTRON lamps should be operated only with magnetic rapid start ballasts designed to operate 265 mA, T-8 lamps or high frequency (electronic) ballasts that are either instant start, or rapid start, or programmed rapid start specifically designed to operate T8 lamps. OCTRON lamps may be operated on instant start or programmed rapid start ballasts with ballast factors ranging from a minimum of 0.71 to a maximum of 1.20 at the nominal ballast input voltage (see ballast specs for details). When OCTRON lamps are operated in the instant start mode, the two contacts (bi-pin lamps) of each rapid start lampholder/socket should be connected to each other or use "shunted" circle I lampholders/sockets for instant start bi-pin lamps. Always disconnect power before servicing installations and wire per the balla schematics and National Electric Code.
• The life ratings of fluorescent lamps are based on 3 hr. burning cycles under specified conditions and with ballast meeting ANSI specifications. If burning cycle is increased, there will be a corresponding increase in the average hours life.
• Approximate initial lumens after 100 hours operation.