Features

• The ODS10-IQ uses passive infrared (PIR) detectiontechnology to monitor a room for occupancythrough a segmented Fresnel lens. This specializedlens divides the field-of-view into sensorzones. When a person passes into or out of asensor zone, the sensor detects motion andautomatically switches the lights ON. Lighting willremain ON for the specified time-delay after thesensor motion is detected; an occupant movingthrough the sensor zones resets the time-delayto keep the lights ON. Once the specified timedelayhas expired, the sensor will automaticallyturn the lights OFF.
• Fits in standard wallbox and replaces single-pole wall switch. Gangable with other units.
• Low-profile design eliminates obtrusive “scanning-device” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices.
• 180° field-of-view provides approximately 2100 square feet of coverage suitable for small offices, conference rooms, classrooms, lounges and a variety of commercial areas.
• Two dual element PIR sensors used to widen detection range.
• Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected.
• Vandal resistant PIR lens.
• Horizontal field-of-view may be adjusted between 180° and 60° of arc by using integral blinders located on either side of the lens. No masking tape required.
• Red LED indicator light flashes when sensor detects motion to verify detection is active.
• Time Delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30 minutes. Allows customized adjustments to maximize lamp life and energy savings.
• Light Sensor Adjustable Ambient Light Override ranges from approximately 2 foot-candles (20 lux) to 500+ foot-candles (5000+ lux) to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings.
• Light sensor enables the load hold-OFF feature once level has been set.
• Vacancy confirmation - when the time out expires and the lights turn OFF a 30 second vacancy confirmation exists to turn the lights back ON.
• False detection circuitry.
• One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts.
• Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts.
• Exclusive Leviton H.I.S. Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service.
• No neutral design is optional for retrofit applications.

Patents

• US6031750

Color Variations

• Black
• White

Specifications

• Country of Origin: Mexico

Product Features

• Application: Public restrooms, School restrooms, Recreational rooms, Mechanical rooms
• Auto-ON/Auto-OFF: Yes
• Color: White
• Grade: Commercial
• Mounting: Wall Switch
• Product Line: ODS10
• Sensor Technology: Passive Infrared (PIR)
• Sensor Type: Occupancy
• Time Delay: 30s-30m

Standards and Certifications

• California Title 24: Yes
• Listings: UL/cUL listed, can be used to comply with Title 24, Part 6 occupancy sensing requirements, complies with FCC regulations, NOM certified
• USMCA Compliant: Yes

Performance Specifications

• Coverage (Sq.Ft.): 2100
• Pattern: 180°

Electrical Specifications

• Frequency: 50/60Hz
• Load Rating: Fluorescent: 1200VA @ 120V 2700VA @ 277V - Incandescent: 800W @ 120V
• Neutral Wire Connection: Not Required
• Standby Power: 120V-100mW, 277V-250mW
• Voltage: 120-277 VAC
• Wiring: Line-Black, Load-Blue, Ground-Green, No Neutral required

Mechanical Specifications

• Mounting Type: Wall Switch
• Size: Height 4.06" (103.2mm), Width 1.75" (44.4mm), Depth 1.83"(47mm), Install Depth 1.35"(34.4mm), Install Height 2.60"(66.2mm)
• Switch Type: Single-Pole

Environmental Specifications

• Operating Temperature: 0°C to 50°C
• Relative Humidity: 20% to 90% non-condensing
• Storage Temperature Range: 14° to 185°F (-10° to 85°C)

Type

• Product Type: Occupancy Sensor

Warranty

• Warranty: 5-Year Limited

Downloads

Application Note

Instruction Sheet

Dimensional Drawing

White Papers

Other Documents

Videos