Features

• Powerswitch® Industrial Grade AC Manual Motor Controllers provide safe, reliable control of a variety of motor loads. Typical applications include manual ON/OFF switching control of conveyor systems, pumping machines, HVAC systems, air compressors and other heavy manufacturing equipment. These motor controllers are available for both single-phase and three-phase applications.

Specifications

• Country of Origin: Mexico
• RoHS Compliant: True

Standards and Certifications

• ANSI: C-73
• NEMA: WD-1 & WD-6
• NOM: NOM-ANCE
• UL 60947-4-1: supersedes UL 508
• Warranty: 10-Year Limited
• cUL per CSA C22.2 No. 111: File #E63969

Electrical Specifications

• Amperage: 40 A
• Dielectric Voltage: Withstands 2200 VAC for 1 min.
• Endurance: 6,000 cycles inductive motor type load
• Grounding: Non-Grounding
• Overload UL20 Test: 50 cycles at 6 times full rated current
• Pole: 2
• Short Circuit Current Rating: 10,000 RMS symmetrical amps at 600V AC max. when protected by a 30A time delay fuse
• Temperature Rise: 50ºC Max at full rated current
• Voltage: 600 VAC

Material Specifications

• Base Material: Thermoplastic Polyester
• Contacts: Silver-Alloy
• Cover Material: Thermoplastic Polyester
• Strap Material: Nickel Plated Brass
• Terminal Screws: Nickel-Plated Brass 10-32
• Toggle: Thermoplastic Polyester

Product Features

• Color: Black
• Device Type: Toggle Switch

Environmental Specifications

• Flammability: Rated V-0 per UL 94
• Operating Temperature: -40°C to 60°C

AC Horsepower Ratings

• HP Rating: 2HP-120V, 5HP-240V, 10HP-480V, 15HP-600V

Mechanical Specifications

• Product ID: Ratings are permanently marked on device
• Terminal Accom.: #10 - #8 AWG
• Terminal ID: T1, T2, L1, & L2 marked on back of device
• Termination: Back & Side
• Torque Range: 20 inch pounds maximum

Downloads

Instruction Sheet

Wiring Diagram

Other Documents