Features

• Threaded for Rigid Conduit and IMC
• Use with All Types of Insulations at All Voltages
• The Design of this Support is Similar to the Type R Except that is it is Equipped with a Locking Collar which Securely Holds the Pozi-grip™ Wedging Plug in Place
• This Permits the Support to be Installed in any Position and Provides Holding Force Against Pull in Either Direction
• For Threadless Rigid Conduit, Threadless IMC, or EMT, the Body Can be Attached to the Male Threads of a Set-Screw or Compression Connector
• Body only Can be Ordered Separately for Installation Prior to Wire Pulling Plug-Only Can be Ordered Later Once Wires are in Place
• If Mounting on a Non-Metallic/Non-Grounded Conduit a Lay-In Lug Grounding Lug Should be Mounted on Cable Support Body
• Can be Installed in Horizontal or Inverted Position
• Use for Supporting Non-Armored Electrical Cables in Conduit
• Due to the Possibility of Magnetic Induction Heating, a Single Alternating Current Conductor Should Not be Used in Iron Fittings

Specifications

• Type: Multiple Segment Plug, Lock
• Body Type: Tapered
• Conduit Type: Rigid/IMC
• Conduit Position: Horizontal/Inverted
• Conductor Size: 18 to 8 AWG, 6 to 0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad, Aluminum/Copper)
• Conduit Size: 2 Inch
• Cable Type: Non-Armored
• Number of Conductors: 5 (Different Size)
• Size: 3-3/8 Inch Dia x 3-1/8 Inch H
• Material: Hot Dip Galvanized Malleable/Ductile Iron
• Approval: UL 514B
• Series/Model: K

Downloads