Features

• Continuous, flicker-free dimming from 100% to 0.7% for T8, 1% for T5 and T5HO, and 5% for T5 twin-tube.
• 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance.
• Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem connection, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.
• Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.
• Lamps turn on to any dimmed level without going to full brightness.
• Low harmonic distortion throughout the entire dimming range maintains power quality.
• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.
• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure.
• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.
• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
• Designed to meet the most demanding lighting requirements
• By providing industry leading performance with a full-range of 100 % to 0.7 % continuous, flicker-free fluorescent dimming, Hi-lume 3D ballasts enable you to provide the ideal visual environment for any application
• 100% compatible with all Lutron 3-wire fluorescent and EcoSystem digital controls for consistent fixture-to-fixture dimming performance
• Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS control units, PowPak dimming modules with EcoSystem connection, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution
• Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling
• Lamps turn on to any dimmed level without going to full brightness
• Low harmonic distortions throughout the entire dimming range maintains power quality
• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 and 42 kHz
• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure
• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity
• Ultra-quiet operation
• 100 % performance-tested and burned-in at factory
• Non-volatile memory restores all ballast settings after power failure
• Custom ballast factors available for UL or CSA-listed products
• Design tool and specifications can be found at www.lutron.com/ballasttool.

Standards and Certifications

• UL
• CSA
• ISO
• Class P thermal protected
• ANSI
• FCC

Specifications

• Start Type: Programmed rapid
• Thermal Protection: Class P
• Total Harmonic Distortion: Less than or equal to 10%
• Type: Ballast
• Voltage Rating: 120/240/277 V
• Wattage: 32 W
• Width: 2.38 in
• Amperage Rating: 0.30@120 V/0.15@240V/0.13@277V
• Application: Lighting Control
• Ballast Factor: 1
• Color: White
• Frequency Rating: 50/60 Hz
• Height: 1 in
• Lamp Type: T8/U-Bend fluorescent
• Length: 9.5 in
• Minimum Starting Temperature: 50 F
• Mounting: Fixture
• Number Of Lamps: 1
• Power Factor: Greater than or equal to 0.95

Downloads