Product Information

• Industry Standards: ANSI C78.901 - 2001
• Diameter (in): 0.625
• Family Brand Name: Dulux® L
• Nominal Wattage (W): 40.00
• Base: 2G11
• Initial Lumens at 25C: 3103
• Abbrev. With Packaging Info.: FT40DL850RSECO 10/CS 1/SKU
• Bulb: T17,5
• Maximum Overall Length - MOL (in): 22.4
• Maximum Overall Length - MOL (mm): 573
• Diameter (mm): 15.88
• Mean Lumens at 25C: 2709
• Color Rendering Index (CRI): 80 - 89
• Color Temperature/CCT (K): 5000

Additional Product Information

Packaging Information

• Case Depth (in): 24.291
• Case Qty: 10
• SKU UPC: 046135205767
• SKU's/Pallet: 1680
• Case Length (in): 5.512
• Case Cube (ft): 0.326
• Pallet Qty: 1680
• SKU Qty: 1
• SKU's/Case: 10
• Case Weight (lbs): 4.101
• Cases/Pallet: 168
• Case Width (in): 4.213

Product Documents, Graphs, and Images

Footnotes

• Rule of Thumb for Compact Fluorescent Lamps: Divide wattage of incandescent lamp by 4 to determine approximate wattage of compact fluorescent lamp that will provide similar light output.
• There is a NEMA supported, industry issue where T2, T4, and T5 fluorescent and compact fluorescent lamps operated on high frequency ballasts may experience an abnormal end-of-life phenomenon. This end-of-life phenomenon can resultin one or both of the following: 1. Bulb wall cracking near the lamp base. 2. The lamp can overheat in the base area and possibly melt the base and socket. NEMA recommends that high frequency compact fluorescent ballasts have an end-of-life shutdown circuit which will safely and reliably shut down the system in the rare event of an abnormal end-of-life failure mode described above. The final requirements of this system are yet to be defined by ANSI. For additional information refer to NEMA papers on their WEBSITE at www.NEMA.org.
• The life ratings of fluorescent lamps are based on 3 hr. burning cycles under specified conditions and with ballast meeting ANSI specifications. If burning cycle is increased, there will be a corresponding increase in the average hours life.
• Approximate initial lumens after 100 hours operation.
• Minimum starting temperature is a function of the ballast; consult the ballast manufacturer.