Features

• Explosionproof, dust-ignitionproof, raintight
• Prevent passage of gases, vapors or flames from one portion of conduit system to another. Restrict any explosion to the sealed off enclosure. Prevent pressure piling within conduit system
• Required in Class I, Division 1 and 2 locations within 18" of enclosures containing apparatus that may cause arcs, sparks or high temperatures
• Required in Class I, Division 1 and 2 locations where 2" or larger conduit enters enclosure, fitting housing terminals, splices or taps
• Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
• Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36" or less conduit. Seal must be located within 18" of either enclosure
• Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations
• Smooth, rounded integral bushing in each hub protects conductor insulation
• Accurately tapped, tapered threads for tight, rigid joints and ground continuity
• Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
• UL Listed for use with Kwiko™ A Sealing Compound. Also listed with certain competitors sealing cement, contact factory for details
• Close radius type for sealing vertical or horizontal conduit runs

Specifications

• Standard Material and Finishes: Malleable iron with triple-coat finish (1) zinc electroplate, (2) chromate, and (3) epoxy powder coat, or Almag 35 aluminum with epoxy powder coat

Certifications and Compliances

• NEC/CEC Certifications and Compliances: Class I, Division 1 and 2, Groups A, B, C, D; Class II, Division 1 and 2, Groups E, F, G; Class III

Downloads

Catalogs

Manuals & Guides