{"title":"Wall Heaters","description":null,"products":[{"product_id":"marley-cwh1101dsf-1000w-120v-htr","title":"MARLEY CWH1101DSF 1000W 120V Htr","description":"\u003ch2\u003eMARLEY CWH1101DSF 1000W 120V Heater ‚Äì Commercial Fan-Forced Wall Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY CWH1101DSF is a 1000-watt, 120-volt fan-forced wall heater designed for commercial and light-duty residential heating applications. Ideal for use by electrical distributors and switchgear suppliers providing lighting solutions and wire and cable products, this heater offers fast heat response and compact design suitable for dens, basements, garages, small offices, bathrooms, workshops, and similar spaces. Its rugged construction and built-in safety features ensure reliable operation in various electrical installations.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePower: 1000 Watts\u003c\/li\u003e\n  \u003cli\u003eVoltage: 120 Volts\u003c\/li\u003e\n  \u003cli\u003eCurrent: 8.4 Amps (full wattage), 4.2 Amps (half wattage)\u003c\/li\u003e\n  \u003cli\u003eAirflow: 65 CFM\u003c\/li\u003e\n  \u003cli\u003eHeating Capacity: 3413 BTU\/hr (full wattage), 1706 BTU\/hr (half wattage)\u003c\/li\u003e\n  \u003cli\u003eWire Size: 14 AWG\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 12 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions (Grille): 12-1\/2\" H x 10-3\/8\" W x 1\" D\u003c\/li\u003e\n  \u003cli\u003eDimensions (Back Box): 11-1\/4\" H x 9-1\/2\" W x 3-3\/4\" D\u003c\/li\u003e\n  \u003cli\u003eBuilt-in snap action thermostat with temperature range 40¬∫ - 85¬∫F\u003c\/li\u003e\n  \u003cli\u003eFan Delay Control to prevent cold air circulation on startup and extend component life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty steel fins brazed to steel-sheathed tubular heating elements arranged in a grid pattern for uniform heat distribution\u003c\/li\u003e\n  \u003cli\u003eFan delay energizes fan only after heating elements are warm, preventing cold air discharge\u003c\/li\u003e\n  \u003cli\u003eFan continues to run after heating cycle to dissipate residual heat, enhancing comfort and prolonging component life\u003c\/li\u003e\n  \u003cli\u003eTotally enclosed, impedance protected motor with permanently lubricated bearings for low maintenance and long life\u003c\/li\u003e\n  \u003cli\u003eRugged louvered commercial-grade steel grille creating a downflow air pattern\u003c\/li\u003e\n  \u003cli\u003eIncludes built-in disconnect switch for safer maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned for recessed installation in 2\" x 4\" or larger wall sections with supplied wall box; surface mounting available with optional mounting frame (Model CWHSM)\u003c\/li\u003e\n  \u003cli\u003eDurable Northern White polyester powder coat finish for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eThermal overheat protector with manual reset and visible red alarm light for safety\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard building wire rated for 60¬∞C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/BERCOME00073_10.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/QMARMAINST00112.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100141\/QMARMAE00259_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45853883629793,"sku":"393865","price":457.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/393865_image1_df909bde-c143-4c4b-805a-6387b85d3b24.jpg?v=1787818083"},{"product_id":"marley-muh078-7-5kw-at-208v-1-3ph-horizontal-downflow-unit-heater","title":"MARLEY MUH078 7.5KW AT 208V 1-3PH HORIZONTAL\/DOWNFLOW UNIT HEATER","description":"\u003ch2\u003eMARLEY MUH078 7.5KW AT 208V 1-3PH HORIZONTAL\/DOWNFLOW UNIT HEATER - Industrial Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH078 is a 7.5 kW modular electric unit heater designed for robust industrial heating applications. It operates at 208 volts and supports single or three-phase power, providing versatile electrical compatibility. This unit heater is suitable for use in factories, warehouses, garages, stairwells, shipping docks, power stations, and mechanical rooms. It is engineered for horizontal or downflow mounting, delivering controlled and efficient heat distribution. The MUH078 is ideal for electrical distributors and switchgear suppliers seeking reliable heating solutions for industrial and commercial environments.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower Rating: 7.5 kW\u003c\/li\u003e\n\u003cli\u003eVoltage: 208 V\u003c\/li\u003e\n\u003cli\u003ePhase: 1-3 phase\u003c\/li\u003e\n\u003cli\u003eAmperage: 36 A\u003c\/li\u003e\n\u003cli\u003eBTU\/hr: 26,000\u003c\/li\u003e\n\u003cli\u003eControl Voltage: 24 V\u003c\/li\u003e\n\u003cli\u003eAirflow (CFM): 650\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 38 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 21 3\/4\" x 19\" x 7 1\/2\"\u003c\/li\u003e\n\u003cli\u003eMounting: Horizontal or vertical downflow\u003c\/li\u003e\n\u003cli\u003eColor: Beige or Bronze\u003c\/li\u003e\n\u003cli\u003eThermal Cutout: Linear thermal cutout for safety\u003c\/li\u003e\n\u003cli\u003eHeating Element: Steel sheath clad in copper with aluminum fins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced pull-through airflow design for cooler operation and even heat distribution.\u003c\/li\u003e\n\u003cli\u003eLinear thermal cutout provides automatic protection along the entire heating element.\u003c\/li\u003e\n\u003cli\u003eIndividually adjustable louvers allow precise positioning of heat output.\u003c\/li\u003e\n\u003cli\u003eVenturi outlet supports vertical mounting and enhanced airflow.\u003c\/li\u003e\n\u003cli\u003eSelf-contained unit heater requiring no piping, flues, valves, or traps for installation.\u003c\/li\u003e\n\u003cli\u003eLow voltage control transformer (24 V) enhances safe temperature adjustment.\u003c\/li\u003e\n\u003cli\u003eDurable construction suitable for industrial and indoor\/outdoor transition spaces.\u003c\/li\u003e\n\u003cli\u003eUL Listed and compliant with applicable safety standards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_44_45_121_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00104_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00326_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45853959094497,"sku":"98073","price":1528.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98073_image1_8f58f9a8-5cbb-4d89-a1ba-a028d95ebeff.jpg?v=1787818526"},{"product_id":"marley-cwhsmag-surface-mounting-frame-accessory-order-separately-12-1-2inh-x-10-3-8inw-x-4ind","title":"MARLEY CWHSMAG SURFACE MOUNTING FRAME (ACCESSORY). ORDER SEPARATELY. 12-1\/2INH X 10-3\/8INW X 4IND","description":"\u003ch2\u003eMARLEY CWHSMAG Surface Mounting Frame – Surface Mounting Frame Accessory\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY CWHSMAG Surface Mounting Frame is an accessory designed for surface mounting of CWH Architectural Series commercial fan-forced wall heaters. It provides a robust mounting solution for electrical distributors and switchgear suppliers installing heating solutions in commercial and industrial environments. The frame ensures proper installation on walls where recessed mounting is not feasible, supporting the secure attachment of Marley fan-forced wall heaters.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part Number: CWHSMAG\u003c\/li\u003e\n  \u003cli\u003eDimensions: 12-1\/2\" Height x 10-3\/8\" Width x 4\" Depth\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 3.0 lbs\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360148526\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for surface mounting of CWH Architectural Series heaters\u003c\/li\u003e\n  \u003cli\u003eProvides a sturdy frame to mount heaters on wall surfaces where recessed installation is not possible\u003c\/li\u003e\n  \u003cli\u003eCompatible with Marley commercial fan-forced wall heaters\u003c\/li\u003e\n  \u003cli\u003eFacilitates easy installation and secure attachment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/BERCOME00073_9.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/QMARMAINST00115.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00286_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45853975249121,"sku":"97224","price":107.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/ULE_2b856b0b-c19a-4f8e-82df-4e981a5e6514.jpg?v=1787818593"},{"product_id":"marley-awh4404f-240v-208v-4000-2000-or-3000-1500-architectural-wall-heater-fan-forced","title":"MARLEY AWH4404F 240V\/208V 4000\/2000 OR 3000\/1500 ARCHITECTURAL WALL HEATER FAN FORCED","description":"\u003ch2\u003eMARLEY AWH4404F Architectural Wall Heater Fan Forced\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY AWH4404F is a heavy-duty architectural wall heater designed for powerful and efficient heating in commercial and residential spaces. Suitable for use in vestibules, lobbies, hallways, stairwells, restaurants, conference rooms, offices, basements, and living\/family rooms, this fan-forced wall heater offers reliable temperature control and enhanced heating performance. It is ideal for electrical distributors, lighting solutions providers, wire and cable suppliers, and switchgear suppliers looking to offer robust heating equipment.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 240V\/208V\u003c\/li\u003e\n  \u003cli\u003eWattage: 4000\/2000 W or 3000\/1500 W\u003c\/li\u003e\n  \u003cli\u003ePhase: Single phase\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 25 lbs\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n  \u003cli\u003eAirflow (CFM): 100\u003c\/li\u003e\n  \u003cli\u003eGrille Gauge: 18\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360161983\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFan delay operation: Fan starts only after the unit warms up and continues until the unit cools down, maximizing heating efficiency.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in thermostat with tamper-resistant protection to restrict unauthorized adjustments.\u003c\/li\u003e\n  \u003cli\u003eOptional relay available for integration with Building Management Systems for centralized control.\u003c\/li\u003e\n  \u003cli\u003eArchitectural bar-stock grille design complements designed spaces such as restaurants and entranceways.\u003c\/li\u003e\n  \u003cli\u003ePower on\/off switch included for safety during maintenance.\u003c\/li\u003e\n  \u003cli\u003ePermanently lubricated and enclosed fan motor for long life and low maintenance.\u003c\/li\u003e\n  \u003cli\u003eFactory wired for higher wattage with field-convertible half wattage capability.\u003c\/li\u003e\n  \u003cli\u003eSuitable for wall mounting with air discharge downward; not for floor, ceiling, or upside-down installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_12_13_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00086_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00306_1_2_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45853978329313,"sku":"96997","price":1026.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/96997_image1_b452a672-93b0-4294-9d76-d83f0f1b36ec.jpg?v=1787818598"},{"product_id":"marley-uhmt2-two-stage-thermostat-kit-40-80deg-f-temp-range","title":"MARLEY UHMT2 TWO STAGE THERMOSTAT KIT 40-80DEG F TEMP. RANGE","description":"\u003ch2\u003eMARLEY UHMT2 Two Stage Thermostat Kit 40-80¬∞F Temperature Range\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY UHMT2 is a two-stage internal thermostat kit designed for precise temperature control within the 40-80¬∞F range. It is suitable for integration with Marley unit heaters, providing reliable temperature regulation in commercial and industrial heating applications. This thermostat kit is ideal for electrical distributors and switchgear suppliers looking to enhance lighting solutions and wire and cable systems with effective heating control components.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part #: UHMT2\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40¬∞- 85¬∞F\u003c\/li\u003e\n  \u003cli\u003eElectrical Rating: 25A @ 120, 240VAC Resistive, 22A @ 277VAC Resistive, 125VA\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 1.0000 lbs\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360152424\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-stage internal thermostat for enhanced temperature control\u003c\/li\u003e\n  \u003cli\u003eCompatible with Marley MUH series unit heaters\u003c\/li\u003e\n  \u003cli\u003eSupports high electrical loads suitable for commercial heating systems\u003c\/li\u003e\n  \u003cli\u003eCompact design for easy integration into existing heating units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_46_122_125_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00115_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00323_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854006739169,"sku":"98714","price":325.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98714_image1_443cda2f-0b50-4e68-adf1-edde733d3fd4.jpg?v=1787818737"},{"product_id":"5kw-480v-3p-5100-series-unit-htr","title":"5KW 480V 3P 5100 SERIES UNIT HTR.","description":"\u003ch2\u003e5KW 480V 3P 5100 Series Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe 5KW 480V 3P 5100 Series Unit Heater by TPI is a fan-forced unit heater designed for industrial and commercial heating applications. It is suitable for horizontal or vertical mounting and is ideal for electrical distributors and switchgear suppliers seeking reliable heating solutions for wire and cable environments or other electrical installations.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 5.0 KW\u003c\/li\u003e\n\u003cli\u003eVoltage: 480 V\u003c\/li\u003e\n\u003cli\u003ePhase: 3\u003c\/li\u003e\n\u003cli\u003eAmps: 6.1\u003c\/li\u003e\n\u003cli\u003eControl Voltage: 24 V\u003c\/li\u003e\n\u003cli\u003eTemperature Rise: 40°F\u003c\/li\u003e\n\u003cli\u003eRecommended Mounting Height: Horizontal 12’, Vertical 9’\u003c\/li\u003e\n\u003cli\u003eAir Throw: 12’\u003c\/li\u003e\n\u003cli\u003eAirflow: 400 CFM\u003c\/li\u003e\n\u003cli\u003eWeight: 27 lbs\u003c\/li\u003e\n\u003cli\u003eManufacturer Part #: P3P5105CA1N\u003c\/li\u003e\n\u003cli\u003eUPC: 686334645188\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFan-forced heating for efficient air distribution\u003c\/li\u003e\n\u003cli\u003eDesigned for 24V control systems\u003c\/li\u003e\n\u003cli\u003eSuitable for horizontal or vertical installation\u003c\/li\u003e\n\u003cli\u003eCompact and lightweight design at 27 lbs\u003c\/li\u003e\n\u003cli\u003eReliable performance for industrial heating needs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100133\/TPITPIE00363_16.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TPI","offers":[{"title":"Default Title","offer_id":45854121296097,"sku":"167761","price":1971.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/167761_image1_a685a9d2-bd86-4435-8cfc-92bdbb46ddd4.jpg?v=1787819277"},{"product_id":"marley-cwh1151dsaf-120v-1000-750-watt-architectural-wall-heater-fan-forced","title":"MARLEY CWH1151DSAF 120V 1000\/750 WATT ARCHITECTURAL WALL HEATER FAN FORCED","description":"\u003ch2\u003eMARLEY CWH1151DSAF 120V 1000\/750 Watt Architectural Wall Heater Fan Forced\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY CWH1151DSAF is a commercial-grade architectural fan-forced wall heater designed for fast heat response and versatile installation in residential and light commercial settings. Ideal for dens, basements, garages, bathrooms, small offices, and workshops, this heater provides reliable comfort heating with a compact design suitable for 2x4 or larger wall sections. It is engineered for easy installation, maintenance, and efficient operation, making it a practical choice for electrical distributors and lighting solutions providers focusing on wire and cable and switchgear supply.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 120V\u003c\/li\u003e\n  \u003cli\u003eWattage: 1000\/750 Watts\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 12 lbs\u003c\/li\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part #: CWH1151DSAF\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360162980\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty steel fins brazed to steel-sheathed tubular heating elements arranged in a grid pattern for full discharge area coverage.\u003c\/li\u003e\n  \u003cli\u003eFan delay feature energizes heating element first, delaying fan operation until element warms to prevent cold air circulation on startup.\u003c\/li\u003e\n  \u003cli\u003eFan continues to run after thermostat satisfaction to discharge residual heat, extending component life and improving comfort.\u003c\/li\u003e\n  \u003cli\u003eTotally enclosed motor with impedance protection and permanently lubricated bearings for durability.\u003c\/li\u003e\n  \u003cli\u003eRugged louvered commercial-grade steel architectural grille creating a downflow air pattern.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in snap action thermostat with temperature range of 40¬∞ - 85¬∞F, designed to avoid radio\/TV interference.\u003c\/li\u003e\n  \u003cli\u003eIncludes built-in disconnect switch and tamper-resistant hole plug for secure installations.\u003c\/li\u003e\n  \u003cli\u003eStatuary bronze durable polyester powder coat finish with aluminum frame.\u003c\/li\u003e\n  \u003cli\u003eDesigned for installation in 2x4 or larger wall sections with provided wall box; surface mounting possible with separately ordered mounting frame.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard building wire rated at 60¬∞C.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/BERCOME00073_9.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/QMARMAINST00115.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00286_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854192238817,"sku":"97167","price":668.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97167_image1_121f5137-501d-4ead-806b-0cdec26ce5cb.jpg?v=1787819823"},{"product_id":"marley-muh0381-3kw-at-208v-1ph-horizontal-downflow-unit-heater","title":"MARLEY MUH0381 3KW AT 208V 1PH HORIZONTAL\/DOWNFLOW UNIT HEATER","description":"\u003ch2\u003eMARLEY MUH0381 3KW AT 208V 1PH HORIZONTAL\/DOWNFLOW UNIT HEATER ‚Äì Industrial Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH0381 is a rugged 3 kW unit heater designed for industrial applications requiring reliable and efficient heating solutions. Operating at 208 volts and single-phase power, this horizontal\/downflow unit heater is suitable for factories, warehouses, garages, stairwells, shipping docks, power stations, and mechanical rooms. It is a self-contained unit heater that does not require piping, flues, valves, or traps, making it ready for immediate installation in various commercial and industrial settings.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: MUH0381\u003c\/li\u003e\n  \u003cli\u003eVoltage: 208 V\u003c\/li\u003e\n  \u003cli\u003ePhase: Single-phase (1PH)\u003c\/li\u003e\n  \u003cli\u003ePower: 3 kW\u003c\/li\u003e\n  \u003cli\u003eAmperage: 14.5 A\u003c\/li\u003e\n  \u003cli\u003eBTU\/hr: 10,000\u003c\/li\u003e\n  \u003cli\u003eAirflow (CFM): 350\u003c\/li\u003e\n  \u003cli\u003eWeight: 27 lbs\u003c\/li\u003e\n  \u003cli\u003eOperating Temperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n  \u003cli\u003eDimensions: Height 16\" x Width 14\" x Depth 7 ¬Ω\" (406.4 mm x 355.6 mm x 190.5 mm)\u003c\/li\u003e\n  \u003cli\u003eControl Voltage: 208 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced Airflow: Pull-through design draws air across the heating element for cooler operation and even heat distribution.\u003c\/li\u003e\n  \u003cli\u003eSafe Operation: Equipped with a linear thermal cutout for automatic protection along the entire heating element length and a 24V control transformer for safer temperature adjustment.\u003c\/li\u003e\n  \u003cli\u003ePrecise Positioning: Individually adjustable louvers allow directional control of heated air, with a venturi outlet for additional airflow when mounted vertically.\u003c\/li\u003e\n  \u003cli\u003eDurable Heating Element: Steel sheath heating element clad in copper and outfitted with aluminum fins for enhanced safety and faster cooldown.\u003c\/li\u003e\n  \u003cli\u003eEasy Installation: Self-contained unit heater requiring no piping, flues, valves, or traps.\u003c\/li\u003e\n  \u003cli\u003eUL Listed and suitable for industrial and commercial environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_44_45_121_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00104_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00326_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854253744353,"sku":"98043","price":969.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98043_image1_7875a9aa-7749-4ff7-86e3-5afee71f58e9.jpg?v=1787820598"},{"product_id":"marley-icg36041-3-6-kw-at-240v-1ph-explosion-proof-convector-t2a-temperature-rating","title":"MARLEY ICG36041 3.6 KW AT 240V 1PH EXPLOSION PROOF CONVECTOR -T2A TEMPERATURE RATING","description":"\u003ch2\u003eMARLEY ICG36041 Explosion Proof Convector Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY ICG36041 is a 3.6 kW, 240V, single-phase explosion-proof convector heater designed for hazardous locations classified as Class I, Groups B, C, \u0026amp; D, Division 1 and 2 environments. Manufactured by Marley Engineered Products, this convector provides reliable heating solutions in demanding industrial applications including oil rigs, refineries, sewage treatment plants, petrochemical plants, pumping stations, chemical storage and handling facilities, and paint storage areas. It is suitable for electrical distributors and switchgear suppliers looking to provide safe and durable heating solutions in hazardous environments.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePower: 3.6 kW\u003c\/li\u003e\n  \u003cli\u003eVoltage: 240 V\u003c\/li\u003e\n  \u003cli\u003ePhase: Single-phase (1PH)\u003c\/li\u003e\n  \u003cli\u003eTemperature Rating: T2A (536¬∞F \/ 280¬∞C)\u003c\/li\u003e\n  \u003cli\u003eWeight: 58 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions: 34\" Length x 20\" Height x 9\" Width\u003c\/li\u003e\n  \u003cli\u003eColor: Neutral Gray\u003c\/li\u003e\n  \u003cli\u003eMaterial: Polyester powder-coated heavy-gauge steel for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for hazardous locations with explosion-proof junction boxes for conduit entry and ease of wiring\u003c\/li\u003e\n  \u003cli\u003eHigh-quality, long-life tubular heating elements with high-grade resistance wire embedded in magnesium oxide (MGO), centered in a heavy gauge 1.25-inch diameter sheath with 3 x 3.25-inch fins for efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eEasily mounted on walls using included mounting brackets\u003c\/li\u003e\n  \u003cli\u003eSloped top cabinet design prevents objects from being placed on top, maintaining unobstructed airflow\u003c\/li\u003e\n  \u003cli\u003eSuitable for use in Class I, Groups B, C, \u0026amp; D hazardous areas, including Division 1 and 2 environments\u003c\/li\u003e\n  \u003cli\u003eComplies with National Electrical Code (NEC) requirements for hazardous (classified) locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100244\/QMARMAE00364_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100002\/QMARMAINST00078.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100244\/QMARMAE00364_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854328357089,"sku":"97813","price":3537.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97813_image1_3ace5bbb-f06d-4f2b-b226-26a4bf44496b.jpg?v=1787821434"},{"product_id":"marley-muh0581-5kw-at-208v-1-3ph-horizontal-downflow-unit-heater","title":"MARLEY MUH0581 5KW AT 208V 1-3PH HORIZONTAL\/DOWNFLOW UNIT HEATER","description":"\u003ch2\u003eMARLEY MUH0581 5KW AT 208V 1-3PH HORIZONTAL\/DOWNFLOW UNIT HEATER - Industrial Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH0581 is a 5 kW modular unit heater designed for industrial and commercial heating applications. It operates at 208 volts and supports both single-phase and three-phase power, providing flexible electrical compatibility. This unit heater is suitable for use in factories, warehouses, garages, stairwells, shipping docks, power stations, and mechanical rooms. The heater is engineered to deliver reliable, powerful output with a horizontal or downflow air discharge, making it ideal for indoor or indoor\/outdoor transition spaces. As a product from Marley Engineered Products, it meets the needs of electrical distributors and switchgear suppliers requiring efficient heating solutions.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eModel Number: MUH0581\u003c\/li\u003e\n  \u003cli\u003ePower Output: 5 kW\u003c\/li\u003e\n  \u003cli\u003eVoltage: 208 V\u003c\/li\u003e\n  \u003cli\u003ePhase: 1-3\u003c\/li\u003e\n  \u003cli\u003eAmperage: 24 A\u003c\/li\u003e\n  \u003cli\u003eBTU\/hr: 17,000\u003c\/li\u003e\n  \u003cli\u003eCFM (Airflow): 350\u003c\/li\u003e\n  \u003cli\u003eWeight: 27 lbs (including mounting bracket)\u003c\/li\u003e\n  \u003cli\u003eDimensions: 16\" Height x 14\" Width x 7.5\" Depth\u003c\/li\u003e\n  \u003cli\u003eControl Voltage: 208 V with low voltage 24 V control transformer included\u003c\/li\u003e\n  \u003cli\u003eOperating Temperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced airflow pull-through design for cooler operation and even heat distribution\u003c\/li\u003e\n  \u003cli\u003eSafety features include a linear thermal cutout protecting the entire heating element length and a 24 V control transformer for safer temperature adjustment\u003c\/li\u003e\n  \u003cli\u003eIndividually adjustable louvers for precise heat positioning\u003c\/li\u003e\n  \u003cli\u003eVenturi outlet supports vertical mounting\u003c\/li\u003e\n  \u003cli\u003eSteel sheath heating element clad in copper with aluminum fins for faster cool down and safer operation\u003c\/li\u003e\n  \u003cli\u003eSelf-contained design requiring no piping, flues, valves, or traps, ready for straightforward installation\u003c\/li\u003e\n  \u003cli\u003eUL listed for safety and reliability\u003c\/li\u003e\n  \u003cli\u003eColor options: Beige and Bronze\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_44_45_121_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00104_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00326_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854383898849,"sku":"98063","price":988.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98063_image1_08bfa718-a153-4762-8d3c-bba1c4e0966b.jpg?v=1787822152"},{"product_id":"marley-awh4508f-208v-4800-watt-architectural-wall-heater-fan-forced","title":"MARLEY AWH4508F 208V 4800 WATT ARCHITECTURAL WALL HEATER FAN FORCED","description":"\u003ch2\u003eMARLEY AWH4508F 208V 4800 Watt Architectural Wall Heater Fan Forced\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY AWH4508F is a heavy-duty, fan-forced architectural wall heater designed for commercial and industrial applications requiring high-capacity heating and quick recovery. Operating at 208 volts with a power rating of 4800 watts, this heater is suitable for large, hard-to-heat areas such as motels, entryways, stores, public restrooms, and warehouses. Ideal for electrical distributors and switchgear suppliers, it offers reliable performance with integral safety and control features.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 208 V\u003c\/li\u003e\n  \u003cli\u003eWattage: 4800 W\u003c\/li\u003e\n  \u003cli\u003ePhase: Single phase\u003c\/li\u003e\n  \u003cli\u003eAmperage: 23.1 A\u003c\/li\u003e\n  \u003cli\u003eWire Size: 10 AWG\u003c\/li\u003e\n  \u003cli\u003eAirflow: 100 CFM\u003c\/li\u003e\n  \u003cli\u003eDimensions: 19-3\/16\" H x 15-3\/4\" W x 2-1\/2\" D\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 25 lbs\u003c\/li\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part #: AWH4508F\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360162300\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel finned metal sheath electric heating elements with low sheath temperature for uniform heat distribution and long service life.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in integral thermostat (range 40¬∞ - 90¬∞F) with tamper-resistant adjustment through the grille, eliminating the need for a separate thermostat.\u003c\/li\u003e\n  \u003cli\u003eThermal overheat protector to disconnect power in case of overheating due to blockage.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in double-pole power disconnect switch for added safety during maintenance.\u003c\/li\u003e\n  \u003cli\u003eFan delay switch energizes the fan motor only after elements are heated and runs after heating shuts off to dissipate residual heat, improving efficiency.\u003c\/li\u003e\n  \u003cli\u003ePermanently lubricated, totally enclosed fan motor for long life and low maintenance.\u003c\/li\u003e\n  \u003cli\u003eContemporary steel bar grille with durable polyester powder coat finish and satin-finished aluminum frame for lasting appearance.\u003c\/li\u003e\n  \u003cli\u003eCan be recessed or surface mounted in standard 2‚Äù x 4‚Äù stud walls.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 60¬∞C wire.\u003c\/li\u003e\n  \u003cli\u003eOptional accessory power control relays or pneumatic\/electric switch available.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/BERCOME00073_8.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/QMARMAINST00111.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100141\/QMARMAE00255_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854402412769,"sku":"97008","price":1209.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97008_image1_c3677044-ff2c-4799-b8b9-764570817d3b.jpg?v=1787822383"},{"product_id":"marley-muh104-10kw-at-480v-3ph-horizontal-downflow-unit-heater","title":"MARLEY MUH104 10KW AT 480V 3PH HORIZONTAL\/DOWNFLOW UNIT HEATER","description":"\u003ch2\u003eMARLEY MUH104 10KW AT 480V 3PH HORIZONTAL\/DOWNFLOW UNIT HEATER - Industrial Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH104 is a rugged, modular unit heater designed for industrial applications requiring efficient and reliable heating solutions. Operating at 10 kW and 480V 3-phase power, this unit heater is suitable for electrical distributors and switchgear suppliers servicing factories, warehouses, garages, shipping docks, and mechanical rooms. Its horizontal\/downflow design facilitates flexible mounting and precise airflow control, making it ideal for heating indoor\/outdoor transition spaces such as loading docks.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel Number: MUH104\u003c\/li\u003e\n  \u003cli\u003ePower: 10 kW\u003c\/li\u003e\n  \u003cli\u003eVoltage: 480 V\u003c\/li\u003e\n  \u003cli\u003ePhase: 3\u003c\/li\u003e\n  \u003cli\u003eAmperage: 12 A\u003c\/li\u003e\n  \u003cli\u003eBTU\/hr: 34,000\u003c\/li\u003e\n  \u003cli\u003eCFM (Airflow): 650\u003c\/li\u003e\n  \u003cli\u003eControl Voltage: 24 V\u003c\/li\u003e\n  \u003cli\u003eDimensions (H x W x D): 21 3\/4\" x 19\" x 7 1\/2\" (552.5 mm x 482.6 mm x 190.5 mm)\u003c\/li\u003e\n  \u003cli\u003eWeight: 38 lbs (17.2 kg)\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n  \u003cli\u003eColor Options: Beige, Bronze\u003c\/li\u003e\n  \u003cli\u003eUL Listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced Airflow: Pull-through design draws air across the heating element for cooler operation and even heat distribution.\u003c\/li\u003e\n  \u003cli\u003eSafe Operation: Equipped with a linear thermal cutout providing automatic protection along the entire heating element length; includes a 24V control transformer for safer temperature adjustments.\u003c\/li\u003e\n  \u003cli\u003ePrecise Positioning: Individually adjustable louvers allow targeted airflow; venturi outlet supports vertical mounting.\u003c\/li\u003e\n  \u003cli\u003eDurable Heating Element: Steel sheath clad in copper with aluminum fins for enhanced safety and faster cooling.\u003c\/li\u003e\n  \u003cli\u003eEasy Installation: Self-contained unit requiring no piping, flues, valves, or traps.\u003c\/li\u003e\n  \u003cli\u003eVersatile Mounting: Supports horizontal or vertical discharge with threaded rod mounting or optional pivoting brackets.\u003c\/li\u003e\n  \u003cli\u003eSuitable for Use In: Factories, warehouses, garages, stairwells, shipping docks, power stations, mechanical rooms.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_44_45_121_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00104_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00326_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854424498401,"sku":"98093","price":1784.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98093_image1_a6e4924d-a819-403e-8950-34b38a852754.jpg?v=1787822668"},{"product_id":"marley-awhsm-surface-mounting-frame-for-surface-installations-painted-to-match-heater-decor-3-13-16in-deep","title":"MARLEY AWHSM SURFACE MOUNTING FRAME FOR SURFACE INSTALLATIONS. PAINTED TO MATCH HEATER DECOR 3-13\/16IN DEEP","description":"\u003ch2\u003eMARLEY AWHSM Surface Mounting Frame for Surface Installations - Electrical Distributor Lighting Solutions\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY AWHSM surface mounting frame is designed for secure surface installations, painted to match heater decor with a depth of 3-13\/16 inches. This mounting frame is suitable for use with Marley Engineered Products heaters, providing a robust and visually cohesive solution for commercial and industrial heating applications. It supports surface mounting of heating units, facilitating installation in standard 2‚Äù x 4‚Äù stud walls.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProduct Weight: 5 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions: 15-3\/8\" W x 19-3\/16\" H x 3-3\/4\" D\u003c\/li\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part #: AWHSM\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360007243\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePainted to match heater decor for seamless integration\u003c\/li\u003e\n  \u003cli\u003eDesigned for surface mounting installations\u003c\/li\u003e\n  \u003cli\u003eCompatible with Marley Engineered Products heaters\u003c\/li\u003e\n  \u003cli\u003eConstructed for use in standard 2‚Äù x 4‚Äù stud walls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/MarleyEngineeredProducts-Qmark_00180_8_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100020\/MarleyEngineeredProducts-Berko_00014_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/MarleyEngineeredProducts-Qmark_00181_1_2_SPEC.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854464606433,"sku":"97018","price":171.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97018_image1_2f1001d8-1ac1-4a9f-ad92-567561c9c957.jpg?v=1787823179"},{"product_id":"marley-muh154-15kw-at-480v-3ph-horizontal-downflow-unit-heater","title":"MARLEY MUH154 15KW AT 480V 3PH HORIZONTAL\/DOWNFLOW UNIT HEATER","description":"\u003ch2\u003eMARLEY MUH154 15KW AT 480V 3PH HORIZONTAL\/DOWNFLOW UNIT HEATER - Industrial Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH154 is a 15 kW, 480V, 3-phase unit heater designed for industrial heating applications. This horizontal\/downflow unit heater is suitable for factories, warehouses, garages, stairwells, shipping docks, power stations, and mechanical rooms. It provides reliable heating with advanced airflow technology and precise positioning to deliver comfortable warmth in demanding environments. Ideal for electrical distributors, lighting solutions providers, wire and cable suppliers, and switchgear suppliers requiring rugged and efficient heating solutions.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eModel Number: MUH154\u003c\/li\u003e\n  \u003cli\u003ePower Output: 15 kW\u003c\/li\u003e\n  \u003cli\u003eVoltage: 480 V\u003c\/li\u003e\n  \u003cli\u003ePhase: 3-Phase\u003c\/li\u003e\n  \u003cli\u003eControl Voltage: 24 V\u003c\/li\u003e\n  \u003cli\u003eAirflow (CFM): 910\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n  \u003cli\u003eDimensions (H x W x D): 21 3\/4\" x 19\" x 12 3\/4\"\u003c\/li\u003e\n  \u003cli\u003eWeight: 53 lbs\u003c\/li\u003e\n  \u003cli\u003eColor Options: Beige, Bronze\u003c\/li\u003e\n  \u003cli\u003eUL Certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced airflow pull-through design for cooler operation and even heat distribution.\u003c\/li\u003e\n  \u003cli\u003eLinear thermal cutout for automatic protection along the entire heating element length.\u003c\/li\u003e\n  \u003cli\u003e24V control transformer for safe temperature adjustment.\u003c\/li\u003e\n  \u003cli\u003eIndividually adjustable louvers for precise heat direction.\u003c\/li\u003e\n  \u003cli\u003eVenturi outlet supports vertical mounting configurations.\u003c\/li\u003e\n  \u003cli\u003eSteel sheath heating element clad in copper with aluminum fins for enhanced safety and faster cooldown.\u003c\/li\u003e\n  \u003cli\u003eSelf-contained unit requiring no piping, flues, valves, or traps for installation.\u003c\/li\u003e\n  \u003cli\u003eSuitable for industrial and indoor\/outdoor transition spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_44_45_121_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00104_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00326_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854480433377,"sku":"98100","price":2877.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98100_image1_3c20841c-b934-49f7-a339-0f608aa2ff6b.jpg?v=1787823365"},{"product_id":"540-1800w-at-120v-smart-series-artisan-architectural-wall-heater-northern-white","title":"540 - 1800W AT 120V SMART SERIES ARTISAN ARCHITECTURAL WALL HEATER - NORTHERN WHITE","description":"\u003ch2\u003e540 - 1800W AT 120V SMART SERIES ARTISAN ARCHITECTURAL WALL HEATER - Northern White\u003c\/h2\u003e\n\n\u003cp\u003eThe 540 - 1800W at 120V Smart Series Artisan Architectural Wall Heater by Marley Engineered Products is a programmable architectural electric wall heater designed for efficient, precise heating control in commercial and residential applications. Suitable for use in restaurants, hotels, conference rooms, atriums, and residential spaces, this heater integrates advanced features for energy savings and easy installation, making it an ideal solution for electrical distributors and lighting solutions providers offering wire and cable and switchgear supplier products.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer Part #: SSAR1802\u003c\/li\u003e\n  \u003cli\u003eVoltage: 120V\u003c\/li\u003e\n  \u003cli\u003eWattage Range: 540 - 1800W\u003c\/li\u003e\n  \u003cli\u003eMaximum Amps: 15A\u003c\/li\u003e\n  \u003cli\u003eMaximum BTU\/hr: 6,142\u003c\/li\u003e\n  \u003cli\u003eDimensions: 19.25\" H x 15.85\" W x 6.25\" D (489 mm x 403 mm x 159 mm)\u003c\/li\u003e\n  \u003cli\u003eWeight: 2.5 lbs\u003c\/li\u003e\n  \u003cli\u003eColor: Northern White (standard grille color)\u003c\/li\u003e\n  \u003cli\u003eThermostat Range: 40¬∞ - 99¬∞F (4¬∞ - 37¬∞C)\u003c\/li\u003e\n  \u003cli\u003eThermostat Accuracy: ¬±1.5¬∞F\u003c\/li\u003e\n  \u003cli\u003eWarranty: 5-Year Element Warranty\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360156835\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5 day \/ 2 day programmable scheduling for customized heating cycles\u003c\/li\u003e\n  \u003cli\u003eBuilding Management System (BMS) connection with dry contact integration\u003c\/li\u003e\n  \u003cli\u003eSecurity lockout function to prevent unauthorized adjustments\u003c\/li\u003e\n  \u003cli\u003e‚ÄúRight out of the box‚Äù setup for quick installation and operation\u003c\/li\u003e\n  \u003cli\u003ePremium heavy-duty cast aluminum grille for durability and architectural styling\u003c\/li\u003e\n  \u003cli\u003eFan-only mode for supplemental ventilation without heat\u003c\/li\u003e\n  \u003cli\u003eEasy-to-use LCD touch screen with night light feature\u003c\/li\u003e\n  \u003cli\u003eRemote control capability for adjustments anywhere in the room\u003c\/li\u003e\n  \u003cli\u003eTwo-piece construction simplifies installation\u003c\/li\u003e\n  \u003cli\u003eAutomatic wattage adjustment for 100% energy efficiency\u003c\/li\u003e\n  \u003cli\u003eOn\/off switch for manual control\u003c\/li\u003e\n  \u003cli\u003ePrecise heat output control within 1.5¬∞F of set temperature\u003c\/li\u003e\n  \u003cli\u003eMultiple color options available including Bronze, Navajo White, Aluminum, and Northern White\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00302_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/QMARMAINST00120.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00302_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854511464673,"sku":"98293","price":1281.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98293_image1_97d156f9-9a26-4281-8e4c-ccf3c6118821.jpg?v=1787823771"},{"product_id":"marley-cwh1151dsf-1500-750-watts-at-120","title":"MARLEY CWH1151DSF 1500\/750 WATTS AT 120","description":"\u003ch2\u003eMARLEY CWH1151DSF 1500\/750 WATTS AT 120 - Fan Forced Wall Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY CWH1151DSF is a commercial fan-forced wall heater designed for efficient supplementary heating in light-duty commercial and residential spaces. Ideal for offices, workshops, garages, and similar areas, this heater offers fast heat response and compact design. It is suitable for recessed or surface mounting in standard 2\" x 4\" stud walls, providing reliable comfort heating with integrated safety features. Electrical distributors and lighting solutions suppliers will appreciate its compatibility with standard building wire and ease of installation.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eModel Number: CWH1151DSF\u003c\/li\u003e\n  \u003cli\u003eVoltage: 120 V\u003c\/li\u003e\n  \u003cli\u003eWattage: 1500\/750 watts (factory wired for higher wattage, field convertible to half wattage)\u003c\/li\u003e\n  \u003cli\u003eAmperage: 12.5\/6.25 A\u003c\/li\u003e\n  \u003cli\u003eAirflow: 65 CFM\u003c\/li\u003e\n  \u003cli\u003eBTU\/hr Output: 5120\/2560\u003c\/li\u003e\n  \u003cli\u003eWire Size: 12 AWG\u003c\/li\u003e\n  \u003cli\u003eWeight: 12 lbs\u003c\/li\u003e\n  \u003cli\u003eFinish: Northern White durable polyester powder coat\u003c\/li\u003e\n  \u003cli\u003eDimensions (Grille): 12-1\/2\" H x 10-3\/8\" W x 1\" D\u003c\/li\u003e\n  \u003cli\u003eDimensions (Back Box): 11-1\/4\" H x 9-1\/2\" W x 3-3\/4\" D\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty steel finned tubular heating elements for uniform heat and long service life\u003c\/li\u003e\n  \u003cli\u003eBuilt-in snap action thermostat with temperature range 40¬∫ - 85¬∫F, no radio\/TV interference\u003c\/li\u003e\n  \u003cli\u003eFan delay feature energizes fan only after elements are heated to prevent circulation of cold air and extends component life\u003c\/li\u003e\n  \u003cli\u003eThermal overheat protector disconnects power in case of overheating due to blockage\u003c\/li\u003e\n  \u003cli\u003eBuilt-in power disconnect switch for safety during maintenance\u003c\/li\u003e\n  \u003cli\u003ePermanently lubricated, totally enclosed fan motor for quiet operation and low maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned for easy installation with roomy wiring compartment and compatibility with standard building wire (60¬∫C)\u003c\/li\u003e\n  \u003cli\u003eSurface or recessed mounting options with available mounting frames (ordered separately)\u003c\/li\u003e\n  \u003cli\u003eIncludes built-in disconnect switch and grounding provisions\u003c\/li\u003e\n  \u003cli\u003eRed alarm light indicates over-temperature shutdown with manual reset button accessible through grille\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/BERCOME00073_10.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/QMARMAINST00112.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100141\/QMARMAE00259_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854560518369,"sku":"97183","price":457.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97183_image1_2daa68e0-585d-4f97-b154-448846c79396.jpg?v=1787824267"},{"product_id":"wall-heater-white-750-1500w-120vac-1125w-208vac-1500w-240-vac","title":"Wall Heater, White, 750\/1500W 120VAC, 1125W 208VAC, 1500W 240 VAC.","description":"\u003ch2\u003eWall Heater, White, 750\/1500W 120VAC, 1125W 208VAC, 1500W 240 VAC - Fan-Forced Wall Heater\u003c\/h2\u003e\n\n\u003cp\u003eThis Broan wall heater provides supplemental fan-forced heat from a wall-mounted location, suitable for new or existing construction. It is designed for electrical distributors and switchgear suppliers requiring reliable heating solutions with versatile voltage and wattage options. The heater operates at multiple voltages including 120VAC, 208VAC, and 240VAC with wattage settings adaptable to various heating needs.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Broan\u003c\/li\u003e\n  \u003cli\u003eModel Number: 174\u003c\/li\u003e\n  \u003cli\u003ePower Ratings: 750\/1500 Watts at 120VAC, 1125 Watts at 208VAC, 1500 Watts at 240VAC\u003c\/li\u003e\n  \u003cli\u003eVoltage: 120VAC, 208VAC, 240VAC\u003c\/li\u003e\n  \u003cli\u003eAmperage: 12.5\/6.25A at 120VAC, 5.41A at 208VAC, 6.25A at 240VAC\u003c\/li\u003e\n  \u003cli\u003eBTU Output: 5120 BTU\/hr at 1500W (120VAC), 3840 BTU\/hr at 1125W (208VAC), 5120 BTU\/hr at 1500W (240VAC)\u003c\/li\u003e\n  \u003cli\u003eColor: White\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 7.2 lbs\u003c\/li\u003e\n  \u003cli\u003eUPC: 026715002573\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFan-forced heating with built-in thermostat for precise temperature control\u003c\/li\u003e\n  \u003cli\u003eSteel housing with white baked enamel grille for durability and aesthetic appeal\u003c\/li\u003e\n  \u003cli\u003eManual reset thermal overload protector for safety\u003c\/li\u003e\n  \u003cli\u003eWattage convertible and voltage selectable for flexible installation\u003c\/li\u003e\n  \u003cli\u003ePermanent lubrication of motor for maintenance-free operation\u003c\/li\u003e\n  \u003cli\u003eHigh-efficiency blower wheel for effective heat distribution\u003c\/li\u003e\n  \u003cli\u003eDesigned for wall mounting only, with installation instructions conforming to electrical codes\u003c\/li\u003e\n  \u003cli\u003eUL Listed ensuring compliance with safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/broan\/2018q3\/b9677a7513a767f1585205b86162aab1afbab590.pdf?did=4169\u0026amp;pid=401818\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Guide 170, 174, 178\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/broan\/2018q3\/6085bd07982f72716462189ebf23d2da8909e26a.pdf?did=4169\u0026amp;pid=401818\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet 165, 167, 170, 174, 178, 171\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/broan\/2018q3\/4cc57fd02a4da5d46ab90b70f0487d900ae33576.pdf?did=4169\u0026amp;pid=401818\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHeaters Room Sizing Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Broan","offers":[{"title":"Default Title","offer_id":45854580736225,"sku":"330271","price":176.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/330271_image1_a4afaa5a-0d61-424f-8ae0-dac6b3183e5d.jpg?v=1787824512"},{"product_id":"marley-cz1512t-1500-750-watts-at-120","title":"MARLEY CZ1512T 1500 \/ 750 WATTS AT 120","description":"\u003ch2\u003eMARLEY CZ1512T 1500 \/ 750 WATTS AT 120 - Residential Fan-Forced Wall Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY CZ1512T is a residential fan-forced zonal wall heater designed for efficient and reliable comfort heating in various indoor spaces. It is ideal for use in bedrooms, bathrooms, hallways, and other living areas requiring zonal heating. This heater features a patented CLIP-N-FIT¬Æ system allowing easy onsite wattage selection, making installation straightforward for electrical distributors and switchgear suppliers. Its compact design and quiet operation provide a practical lighting and heating solution for residential and light commercial applications.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 120 V\u003c\/li\u003e\n  \u003cli\u003eWattage: 1500 W full \/ 750 W half (field convertible)\u003c\/li\u003e\n  \u003cli\u003eAmperage: 12.5 A full \/ 6.3 A half\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 45¬∞‚Äì135¬∞F\u003c\/li\u003e\n  \u003cli\u003eAirflow: 65 CFM\u003c\/li\u003e\n  \u003cli\u003eGrille Gauge: 20\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 11 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions: 12\" H x 9\" W x 4\" D\u003c\/li\u003e\n  \u003cli\u003eColor: White\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360161648\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part #: CZ1512T\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePatented CLIP-N-FIT¬Æ feature enables easy onsite wattage selection for 1500 W or 750 W operation, complying with electrical code requirements.\u003c\/li\u003e\n  \u003cli\u003eFast-response heating element delivers instant warmth to rapidly heat rooms.\u003c\/li\u003e\n  \u003cli\u003eMulti-layer impeller ensures consistent airflow without cold spots, enhancing energy-efficient operation.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in double pole thermostat with positive OFF for localized temperature control; compatible with remote wall-mounted thermostats.\u003c\/li\u003e\n  \u003cli\u003eDual protection with self-hold limit and one-time thermal fuse to prevent overheating and ensure safety.\u003c\/li\u003e\n  \u003cli\u003eCompact, universal design with clean aesthetics fits unobtrusively in any room.\u003c\/li\u003e\n  \u003cli\u003eSuitable for zonal heating in bedrooms, bathrooms, hallways, offices, kitchens, basements, and conference rooms.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_26_27_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100016\/MarleyEngineeredProducts-Berko_00003_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00312_1_2_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854609440993,"sku":"97226","price":211.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97226_image1_f6a0de0b-4ae3-4085-a6a1-57e8b58e2296.jpg?v=1787824930"},{"product_id":"marley-cdfre-navajo-white-recess-mounting-enclosure-only-use-with-innerframe","title":"MARLEY CDFRE NAVAJO WHITE RECESS MOUNTING ENCLOSURE ONLY (USE WITH INNERFRAME)","description":"\u003ch2\u003eMARLEY CDFRE NAVAJO WHITE RECESS MOUNTING ENCLOSURE - Recessed Mounting Enclosure for Commercial Heating Systems\u003c\/h2\u003e\n\n\u003cp\u003eThe Marley CDFRE Navajo White Recess Mounting Enclosure is designed for use with Marley 500 Series ceiling-mounted fan-forced heaters. This recessed mounting enclosure provides a secure and professional installation solution for commercial heating applications, ensuring compatibility with Marley heater sections. Ideal for electrical distributors and switchgear suppliers offering lighting and heating solutions, this enclosure supports efficient wire and cable management in commercial electrical installations.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part #: CDFRE\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 18 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions: 23-3\/4\" L x 23-3\/4\" W x 7\" D (603 mm x 603 mm x 177 mm)\u003c\/li\u003e\n  \u003cli\u003eFinish: Navajo White\u003c\/li\u003e\n  \u003cli\u003eType: Recessed Mounting Enclosure\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360014982\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for use exclusively with Marley 500 Series heater sections\u003c\/li\u003e\n  \u003cli\u003eCompatible with T-bar ceiling grids and plaster ceilings for recessed installation\u003c\/li\u003e\n  \u003cli\u003eConstructed to support heater weight and ensure secure mounting\u003c\/li\u003e\n  \u003cli\u003eIncludes thumb pins and mounting hardware for easy and safe installation\u003c\/li\u003e\n  \u003cli\u003eAllows for adjustable discharge grille installation to customize airflow patterns\u003c\/li\u003e\n  \u003cli\u003eSupports compliance with commercial electrical and building codes\u003c\/li\u003e\n  \u003cli\u003eFacilitates clean, professional ceiling integration for commercial heating systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/MarleyEngineeredProducts-Qmark_00180_16_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100021\/MarleyEngineeredProducts-Qmark_00035_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/MarleyEngineeredProducts-Qmark_00182_1_2_SPEC.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854716559585,"sku":"97101","price":545.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97101_image1_539c58a8-f8ad-4bfc-8e58-9f23c52fbe36.jpg?v=1787826510"},{"product_id":"marley-cdftr4-208-240v-primary-transformer-relay-208-240v-primary-24v-secondary","title":"MARLEY CDFTR4 208\/240V PRIMARY TRANSFORMER RELAY - 208\/240V PRIMARY \u0026 24V SECONDARY","description":"\u003ch2\u003eMARLEY CDFTR4 208\/240V Primary Transformer Relay - Electrical Control Component\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY CDFTR4 is a primary transformer relay designed for use in electrical control systems, providing a 208\/240V primary input with a 24V secondary output. It is intended for integration with heating and lighting solutions, making it suitable for electrical distributors and switchgear suppliers managing wire and cable systems requiring voltage transformation and control relay functions.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part #: CDFTR4\u003c\/li\u003e\n  \u003cli\u003ePrimary Voltage: 208\/240V\u003c\/li\u003e\n  \u003cli\u003eSecondary Voltage: 24V\u003c\/li\u003e\n  \u003cli\u003eFunction: Primary Transformer and 24V Holding Coil Control Relay\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 1 lb (approximate)\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360015057\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides reliable voltage transformation from 208\/240V primary to 24V secondary\u003c\/li\u003e\n  \u003cli\u003eIncludes 24V holding coil control relay for precise control applications\u003c\/li\u003e\n  \u003cli\u003eCompact design suitable for integration in Marley heating and electrical control systems\u003c\/li\u003e\n  \u003cli\u003eDesigned for commercial electrical distribution and control applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/MarleyEngineeredProducts-Qmark_00180_16_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100021\/MarleyEngineeredProducts-Qmark_00035_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/MarleyEngineeredProducts-Qmark_00182_1_2_SPEC.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854755193057,"sku":"97107","price":199.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97107_image1_af37be0b-9013-4c97-8367-aa26cf26c980.jpg?v=1787826826"},{"product_id":"marley-muh0371-3kw-at-277v-1ph-horizontal-downflow-unit-heater","title":"MARLEY MUH0371 3KW AT 277V 1PH HORIZONTAL\/DOWNFLOW UNIT HEATER","description":"\u003ch2\u003eMARLEY MUH0371 3KW AT 277V 1PH HORIZONTAL\/DOWNFLOW UNIT HEATER - Industrial Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH0371 is a rugged industrial unit heater designed for efficient heating in commercial and industrial environments. Operating at 3 kW power with a 277V single-phase supply, this unit heater is suitable for heating factories, warehouses, garages, stairwells, shipping docks, power stations, and mechanical rooms. It provides reliable, controlled warmth with a horizontal or downflow discharge, making it adaptable to various installation needs. This product is ideal for electrical distributors and lighting solutions providers seeking durable heating solutions in wire and cable or switchgear supplier environments.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel Number: MUH0371\u003c\/li\u003e\n  \u003cli\u003ePower: 3 kW\u003c\/li\u003e\n  \u003cli\u003eVoltage: 277 V\u003c\/li\u003e\n  \u003cli\u003ePhase: Single-phase (1PH)\u003c\/li\u003e\n  \u003cli\u003eAmperage: 11 Amps\u003c\/li\u003e\n  \u003cli\u003eBTU\/hr: 10,000\u003c\/li\u003e\n  \u003cli\u003eAirflow (CFM): 350\u003c\/li\u003e\n  \u003cli\u003eWeight: 27 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions (HxWxD): 16\" x 14\" x 7.5\"\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n  \u003cli\u003eControl Voltage: 277 V\u003c\/li\u003e\n  \u003cli\u003eColor: Beige\u003c\/li\u003e\n  \u003cli\u003eUL Listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced Pull-Through Airflow Design ‚Äì draws air evenly across the heating element for cooler operation and consistent comfort.\u003c\/li\u003e\n  \u003cli\u003eSteel Sheath Heating Element ‚Äì clad in copper with aluminum fins for enhanced safety and faster cool-down.\u003c\/li\u003e\n  \u003cli\u003eLinear Thermal Cutout ‚Äì provides automatic protection along the entire length of the heating element.\u003c\/li\u003e\n  \u003cli\u003e24V Control Transformer ‚Äì enables safer temperature adjustment.\u003c\/li\u003e\n  \u003cli\u003eIndividually Adjustable Louvers ‚Äì allow precise positioning of heat output to target specific areas.\u003c\/li\u003e\n  \u003cli\u003eVenturi Outlet ‚Äì supports vertical mounting configurations.\u003c\/li\u003e\n  \u003cli\u003eSelf-Contained Unit ‚Äì no piping, flues, valves, or traps required for installation.\u003c\/li\u003e\n  \u003cli\u003eSuitable for Indoor\/Outdoor Transition Areas ‚Äì robust design supports use in loading docks and similar spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_44_45_121_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00104_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00326_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854773280993,"sku":"98028","price":984.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98028_image1_f75daa4e-1333-4148-bcb1-9005a1167ea0.jpg?v=1787827022"},{"product_id":"marley-cmb10-ceiling-mounting-bracket-for-3kw-to-10kw-units","title":"MARLEY CMB10 CEILING MOUNTING BRACKET FOR 3KW TO 10KW UNITS","description":"\u003ch2\u003eMARLEY CMB10 Ceiling Mounting Bracket for 3KW to 10KW Units\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY CMB10 ceiling mounting bracket is designed for secure installation of unit heaters ranging from 3 kW to 10 kW. It provides a reliable mounting solution compatible with Marley Engineered Products MUH03‚Äì10 series unit heaters. This bracket is suitable for electrical distributors and switchgear suppliers involved in lighting solutions and wire and cable applications requiring robust support hardware for heating units.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer Part #: CMB10\u003c\/li\u003e\n  \u003cli\u003eCompatible Unit Heaters: MUH03‚Äì10\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 3 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions (inches): 1-1\/2\" thickness on mounting surfaces (see diagram)\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360152363\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty steel construction designed for ceiling mounting applications\u003c\/li\u003e\n  \u003cli\u003eSupports unit heaters from 3 kW to 10 kW\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish (not intended for direct salt spray or highly corrosive atmospheres)\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting holes for secure attachment\u003c\/li\u003e\n  \u003cli\u003eCompatible with Marley MUH Series unit heaters ensuring proper fit and stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_46_122_125_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854836457697,"sku":"97110","price":146.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97110_image1_3999a1cd-d092-4999-845b-19aba5001364.jpg?v=1787828043"},{"product_id":"marley-ssar4808w-1800-4800w-at-208v-smart-series-artisan-architectural-wall-heater-navajo-white","title":"MARLEY SSAR4808W 1800 - 4800W AT 208V SMART SERIES ARTISAN ARCHITECTURAL WALL HEATER - NAVAJO WHITE","description":"\u003ch2\u003eMARLEY SSAR4808W 1800 - 4800W Architectural Wall Heater - Smart Series\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY SSAR4808W is a programmable architectural wall heater designed for efficient comfort heating in commercial and residential applications. Ideal for use by electrical distributors and switchgear suppliers, this heater offers precise temperature control and energy-saving features. It is suitable for environments such as restaurants, hotels, conference rooms, and atriums, providing reliable heating with advanced building management system (BMS) connectivity.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n\u003cli\u003eModel Number: SSAR4808W\u003c\/li\u003e\n\u003cli\u003eVoltage: 208V\u003c\/li\u003e\n\u003cli\u003eWattage Range: 1800 - 4800W\u003c\/li\u003e\n\u003cli\u003eCurrent: 23.1 Amps\u003c\/li\u003e\n\u003cli\u003eMaximum BTU\/hr: 16,378\u003c\/li\u003e\n\u003cli\u003eDimensions: 19.25\" H x 15.85\" W x 6.25\" D (489 mm x 403 mm x 159 mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 25 lbs\u003c\/li\u003e\n\u003cli\u003eThermostat Range: 40¬∞ - 99¬∞F (4¬∞ - 37¬∞C)\u003c\/li\u003e\n\u003cli\u003eEnergy Efficiency: 100% energy efficient with automatic wattage adjustment\u003c\/li\u003e\n\u003cli\u003eColor: Navajo White (standard colors also include Bronze, Aluminum, Northern White)\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-Year Element Warranty\u003c\/li\u003e\n\u003cli\u003eUPC: 685360157627\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 day \/ 2 day programmable scheduling for customized heating cycles\u003c\/li\u003e\n\u003cli\u003eBuilding Management System (BMS) connection via dry contact for integrated control\u003c\/li\u003e\n\u003cli\u003eSecurity lockout function to prevent unauthorized adjustments\u003c\/li\u003e\n\u003cli\u003eEasy ‚Äúright out of the box‚Äù setup with LCD touch screen and night light feature\u003c\/li\u003e\n\u003cli\u003eFan-only mode for supplemental ventilation without heat\u003c\/li\u003e\n\u003cli\u003eOn\/off switch for manual control\u003c\/li\u003e\n\u003cli\u003eRemote control capability for adjustments anywhere in the room\u003c\/li\u003e\n\u003cli\u003ePremium heavy-duty cast aluminum grille providing durability and architectural styling\u003c\/li\u003e\n\u003cli\u003ePrecise heat output within 1.5¬∞F of set temperature for consistent comfort\u003c\/li\u003e\n\u003cli\u003e2-piece construction for simplified installation\u003c\/li\u003e\n\u003cli\u003eAutomatic thermal limit control with manual reset and overheat protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00302_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/QMARMAINST00120.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00302_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854863032545,"sku":"98398","price":754.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98398_image1_5f662888-4864-4a04-8229-6930dd1f1618.jpg?v=1787828465"},{"product_id":"cdf558-fan-forced-heater","title":"CDF558, Fan Forced Heater","description":"\u003ch2\u003eCDF558 Fan Forced Heater - Ceiling Mounted Electric Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe CDF558 Fan Forced Heater by Marley Engineered Products is designed for commercial spaces requiring efficient, unobtrusive heating. This recessed ceiling-mounted electric heater delivers powerful warmth ideal for offices, conference rooms, lobbies, waiting rooms, and entranceways. Suitable for large area heating, it is engineered for surface, recess, or T-Bar mounting applications and is UL listed for safety and reliability. Electrical distributors and lighting solutions suppliers will find this product integrates well within wire and cable installations and switchgear systems.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer Part #: CDF558\u003c\/li\u003e\n  \u003cli\u003eMaterial: 20 Gauge Galvanized Steel\u003c\/li\u003e\n  \u003cli\u003eMounting Type: Recessed\u003c\/li\u003e\n  \u003cli\u003eCurrent: 12 \/ 18.3 \/ 24 amperes\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 27 lbs\u003c\/li\u003e\n  \u003cli\u003eElectrical Voltage: 208-277 Volts (1- or 3-phase field convertible)\u003c\/li\u003e\n  \u003cli\u003eFan Motor Speed: 1400 RPM\u003c\/li\u003e\n  \u003cli\u003eAir Flow: 300 CFM\u003c\/li\u003e\n  \u003cli\u003eTemperature Rise: 45¬∞F (25¬∞C)\u003c\/li\u003e\n  \u003cli\u003eDimensions of Recessed Mount Enclosure: 23-3\/4\" L x 23-3\/4\" W x 7\" D\u003c\/li\u003e\n  \u003cli\u003eRecommended Minimum Clearance from Adjacent Wall: 24 inches\u003c\/li\u003e\n  \u003cli\u003eUL Listed (File #E21609)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFan forced heating with non-glowing 80\/20 Ni-Ch resistance wire elements enclosed in steel sheath for uniform heat distribution.\u003c\/li\u003e\n  \u003cli\u003eFactory wired for single-phase operation and field convertible to three-phase operation by removing jumper wire.\u003c\/li\u003e\n  \u003cli\u003eField convertible wattage: factory wired for full wattage; can be reduced to 75% or 50% by removing jumper wires.\u003c\/li\u003e\n  \u003cli\u003eImpedance-protected, permanently lubricated fan motor with totally enclosed rotor.\u003c\/li\u003e\n  \u003cli\u003eBi-metallic snap-action fan control activates fan immediately and continues operation after thermostat satisfaction for safe cooling.\u003c\/li\u003e\n  \u003cli\u003eThermal cutout with automatic reset prevents overheating and ensures operational safety.\u003c\/li\u003e\n  \u003cli\u003eRecessed mounting enclosure made of 20 gauge galvanized steel with knockouts for field wiring; designed for masonry, T-Bar, or frame ceiling construction.\u003c\/li\u003e\n  \u003cli\u003eLouvered recess faceplate electrostatically painted Navajo white with baked enamel finish.\u003c\/li\u003e\n  \u003cli\u003eIncludes comprehensive operational controls: thermostat, disconnect switch, and interlock relays installed within heater enclosure.\u003c\/li\u003e\n  \u003cli\u003eAdjustable discharge grilles allow custom air flow patterns for narrow, wide, or asymmetrical air distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/4855\/xlsx_trimble\/06080315f4d74236e18a1ff057e745f80c3fc967.pdf?did=4169\u0026amp;pid=27649269\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eData Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/4855\/xlsx_trimble\/46683643752d8385adbbb5b319b467abbc8926ec.pdf?did=4169\u0026amp;pid=27649269\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation\/Operator\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/4855\/xlsx_trimble\/4023f5fd97089d2711de9cbdc0f072f4cd316440.pdf?did=4169\u0026amp;pid=27649269\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpecification\/Technical\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854892261601,"sku":"97091","price":1586.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97091_image1_5d010a96-86f6-413d-aa6f-f342fd89c319.jpg?v=1787828833"},{"product_id":"marley-icg18081-1-8-kw-at-208v-1ph-explosion-proof-convector-t2a-temperature-rating","title":"MARLEY ICG18081 1.8 KW AT 208V 1PH EXPLOSION PROOF CONVECTOR -T2A TEMPERATURE RATING","description":"\u003ch2\u003eMARLEY ICG18081 1.8 KW Explosion Proof Convector - Hazardous Location Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY ICG18081 is an explosion-proof convection heater designed to provide safe and reliable heating in hazardous locations classified as Class I, Groups B, C, \u0026amp; D, Division 1 and 2 environments. Ideal for use in industrial settings such as oil rigs, refineries, sewage treatment plants, petrochemical plants, pumping stations, chemical storage and handling facilities, and paint storage areas, this unit offers corrosion-resistant construction and high-quality heating elements suitable for demanding electrical distributor and switchgear supplier applications.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePower: 1.8 kW\u003c\/li\u003e\n  \u003cli\u003eVoltage: 208 V\u003c\/li\u003e\n  \u003cli\u003ePhase: Single Phase (1PH)\u003c\/li\u003e\n  \u003cli\u003eTemperature Rating: T2A (536¬∞F \/ 280¬∞C)\u003c\/li\u003e\n  \u003cli\u003eAmps: 8.7\u003c\/li\u003e\n  \u003cli\u003eBTU Output: 6,140\u003c\/li\u003e\n  \u003cli\u003eWeight: 46 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions (L x H x W): 34\" x 20\" x 9\"\u003c\/li\u003e\n  \u003cli\u003eColor: Neutral Gray\u003c\/li\u003e\n  \u003cli\u003eMaterial: Heavy-gauge steel with polyester powder coating for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for hazardous environments requiring explosion-proof equipment\u003c\/li\u003e\n  \u003cli\u003ePolyester powder-coated heavy-gauge steel cabinet for excellent corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eExplosion-proof junction box included for conduit entry and ease of wiring\u003c\/li\u003e\n  \u003cli\u003eHigh-quality, long-life tubular heating elements with high-grade resistance wire embedded in magnesium oxide (MGO), centered in a heavy-gauge 1.25-inch diameter sheath with 3 x 3.25-inch fins\u003c\/li\u003e\n  \u003cli\u003eWall mounting brackets included for easy installation\u003c\/li\u003e\n  \u003cli\u003eSloped top cabinet design prevents objects from being placed on top, ensuring unrestricted airflow\u003c\/li\u003e\n  \u003cli\u003eSuitable for use by electrical distributors and lighting solutions providers requiring reliable wire and cable compatible heating devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100244\/QMARMAE00364_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100002\/QMARMAINST00078.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100244\/QMARMAE00364_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854900158689,"sku":"97726","price":2940.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97726_image1_d4337f65-8330-49c6-9aa0-60ae6b92ff9b.jpg?v=1787828994"},{"product_id":"marley-mwuh5004-5-000-4-165-3-332-2-500w-at-240v-3-750-3-123-2-500-1-874w-at-208v","title":"MARLEY MWUH5004 5 000\/4 165\/3 332\/2 500W AT 240V (3 750\/3 123\/2 500\/1 874W AT 208V)","description":"\u003ch2\u003eMARLEY MWUH5004 5 000\/4 165\/3 332\/2 500W AT 240V Horizontal\/Downflow Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MWUH5004 is a bundled horizontal\/downflow electric unit heater designed for efficient comfort heating in limited space applications. It features adjustable louvers and flexible mounting options including ceiling or wall installation with a mounting bracket. This unit is suitable for commercial and industrial environments requiring reliable heating solutions. As an electrical distributor or switchgear supplier, you will find this heater integrates easily with existing electrical infrastructure and lighting solutions.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eModel Number: MWUH5004\u003c\/li\u003e\n  \u003cli\u003eVoltage: 208\/240 V\u003c\/li\u003e\n  \u003cli\u003eWattage (adjustable): 1874 W to 5000 W at 240 V; 1874 W to 3750 W at 208 V\u003c\/li\u003e\n  \u003cli\u003eBTU\/hr Output: Up to 17,065 BTU\/hr at 240 V; up to 12,799 BTU\/hr at 208 V\u003c\/li\u003e\n  \u003cli\u003eHeater Amps: Up to 20.9 A at 240 V; up to 24 A at 208 V\u003c\/li\u003e\n  \u003cli\u003eAirflow: 270 CFM\u003c\/li\u003e\n  \u003cli\u003eDimensions: 14\" wide x 12.5\" high x 6.5\" deep (356 mm x 318 mm x 165 mm)\u003c\/li\u003e\n  \u003cli\u003eWeight: 24 lbs\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360047706\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBundled unit includes mounting bracket and built-in thermostat for precise temperature control\u003c\/li\u003e\n  \u003cli\u003eAdjustable louvers allow directional airflow to target cold spots effectively\u003c\/li\u003e\n  \u003cli\u003eCeiling or wall mounting bracket provides installation flexibility\u003c\/li\u003e\n  \u003cli\u003eRobust heating elements designed for long service life in commercial and industrial settings\u003c\/li\u003e\n  \u003cli\u003eAutomatic fan delay prevents circulation of cold air at startup and extends element life\u003c\/li\u003e\n  \u003cli\u003eAutomatic thermal limit safety shutoff protects against overheating\u003c\/li\u003e\n  \u003cli\u003eField-adjustable wattage settings to meet specific heating requirements\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 10 gauge copper wiring and appropriate circuit protection per National Electrical Code\u003c\/li\u003e\n  \u003cli\u003eIncludes detailed installation, operation, and maintenance instructions to ensure safe and efficient operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_52_53_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00108_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00313_1_2_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854928077025,"sku":"98124","price":790.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98124_image1_30eede77-c244-4953-89bc-cb808a3e7839.jpg?v=1787829431"},{"product_id":"marley-icg76041-7-6-kw-at-240v-1ph-explosion-proof-convector-t2a-temperature-rating","title":"MARLEY ICG76041 7.6 KW AT 240V 1PH EXPLOSION PROOF CONVECTOR -T2A TEMPERATURE RATING","description":"\u003ch2\u003eMARLEY ICG76041 Explosion Proof Convector Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY ICG76041 is a 7.6 kW, 240V, single-phase explosion-proof convector heater designed specifically for hazardous environments. Ideal for electrical distributors and lighting solutions providers serving industrial sectors, this convector is suitable for Class I, Groups B, C, \u0026amp; D Division 1 and 2 locations such as oil rigs, refineries, petrochemical plants, sewage treatment plants, pumping stations, chemical storage, and paint storage areas. It provides reliable heating while meeting strict safety standards for hazardous locations.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part #: ICG76041\u003c\/li\u003e\n  \u003cli\u003ePower Rating: 7.6 kW\u003c\/li\u003e\n  \u003cli\u003eVoltage: 240V\u003c\/li\u003e\n  \u003cli\u003ePhase: Single phase (1PH)\u003c\/li\u003e\n  \u003cli\u003eTemperature Rating: T2A (536¬∞F \/ 280¬∞C)\u003c\/li\u003e\n  \u003cli\u003eWeight: 94 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions (L x H x W): 58\" x 20\" x 9\"\u003c\/li\u003e\n  \u003cli\u003eColor: Neutral Gray (Polyester powder-coated finish)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for hazardous locations classified as Class I, Groups B, C \u0026amp; D, Division 1 and 2\u003c\/li\u003e\n  \u003cli\u003eConstructed with heavy-gauge steel and polyester powder coating for excellent corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eIncludes explosion-proof junction box for conduit entry and ease of wiring\u003c\/li\u003e\n  \u003cli\u003eHigh-quality, long-life tubular heating elements with high-grade resistance wire embedded in magnesium oxide (MGO)\u003c\/li\u003e\n  \u003cli\u003eHeating elements centered in 1.25-inch diameter sheath with 3 x 3.25-inch fins for efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eEasily mounted on walls using included mounting brackets\u003c\/li\u003e\n  \u003cli\u003eSloped top cabinet design prevents objects from being placed on top, maintaining proper airflow\u003c\/li\u003e\n  \u003cli\u003eSuitable for use in industrial hazardous areas including oil rigs, refineries, chemical and paint storage, and pumping stations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100244\/QMARMAE00364_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100002\/QMARMAINST00078.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100244\/QMARMAE00364_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854980669665,"sku":"97877","price":4330.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97877_image1_f753eb5a-80e6-4614-874a-efe7bf9dd3cb.jpg?v=1787830255"},{"product_id":"marley-qch1101f-1-000-500w-at-120v-ceiling-mounted-heater-fan-forced","title":"MARLEY QCH1101F 1 000\/500W AT 120V CEILING MOUNTED HEATER FAN FORCED","description":"\u003ch2\u003eMARLEY QCH1101F 1 000\/500W Ceiling Mounted Heater Fan Forced ‚Äì Electrical Distributor Heating Solutions\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY QCH1101F is a ceiling mounted, fan-forced electric heater designed for comfort heating in small to medium-sized areas such as dens, basements, garages, bathrooms, and workshops. Manufactured by Marley Engineered Products, this unit is suitable for recessed or surface mounting (with optional frame), providing reliable heating performance with low watt density tubular heating elements and a durable steel construction. Ideal for electrical distributors and switchgear suppliers seeking dependable wire and cable compatible heating solutions.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eModel Number: QCH1101F\u003c\/li\u003e\n  \u003cli\u003eVoltage: 120V\u003c\/li\u003e\n  \u003cli\u003eWattage: 1000\/500 watts (field convertible to half wattage)\u003c\/li\u003e\n  \u003cli\u003eBTU\/hr: 3413\u003c\/li\u003e\n  \u003cli\u003eAmperage: 8.3 amps\u003c\/li\u003e\n  \u003cli\u003eWeight: 10 lbs\u003c\/li\u003e\n  \u003cli\u003eMounting: Ceiling recessed or surface mount (with optional surface mounting frame)\u003c\/li\u003e\n  \u003cli\u003eMaterial: Commercial grade steel with Navajo White baked enamel finish\u003c\/li\u003e\n  \u003cli\u003eHeating Element: Non-glowing 80\/20 Ni-Ch resistance wire, steel sheathed with copper-brazed fins\u003c\/li\u003e\n  \u003cli\u003eFan: Totally enclosed, permanently lubricated motor with fan delay control\u003c\/li\u003e\n  \u003cli\u003eSafety: Thermal cutout for overheating protection\u003c\/li\u003e\n  \u003cli\u003eUL Listed, File #E21609\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for small to medium rooms including dens, basements, garages, bathrooms, and workshops\u003c\/li\u003e\n  \u003cli\u003eFan delay control ensures fan operates only when heating element is warm and continues until cooled\u003c\/li\u003e\n  \u003cli\u003eThermal cutout automatically shuts off heater in case of overheating\u003c\/li\u003e\n  \u003cli\u003eDisconnect switch factory installed and concealed behind the faceplate for positive power disconnect\u003c\/li\u003e\n  \u003cli\u003eThree-piece design: back box, heater assembly, and snap-on louvered faceplate with no exposed screws\u003c\/li\u003e\n  \u003cli\u003eOptional surface mounting frame and T-bar frame kit available for flexible installation\u003c\/li\u003e\n  \u003cli\u003eRemote wall thermostat control (purchased separately) for precise room temperature regulation\u003c\/li\u003e\n  \u003cli\u003eRugged construction suitable for multiple installations and odd-shaped rooms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00294_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/BERCOMINST00031.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00294_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854983422177,"sku":"98143","price":521.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98143_image1_b1b163a7-a380-4fdd-a427-6649887b0ad2.jpg?v=1787830320"},{"product_id":"marley-sed1512-1-500w-at-120v-shallow-wall-painted-steel-front-wall-heater-fan-forced-northern-white","title":"MARLEY SED1512 1 500W AT 120V SHALLOW WALL PAINTED STEEL FRONT WALL HEATER FAN FORCED - NORTHERN WHITE","description":"\u003ch2\u003eMARLEY SED1512 1500W Shallow Wall Heater Fan Forced - Northern White\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY SED1512 is a 1500-watt, 120-volt fan-forced wall heater designed for recessed shallow wall mount applications, ideal for manufactured homes and various indoor spaces. This unit provides efficient, fast-response heating with a durable painted steel front in Northern White. It is suitable for electrical distributors and contractors specializing in lighting solutions, wire and cable, and switchgear supply requiring reliable heating solutions.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel Number: SED1512\u003c\/li\u003e\n  \u003cli\u003eVoltage: 120 V\u003c\/li\u003e\n  \u003cli\u003eWattage: 1500 W\u003c\/li\u003e\n  \u003cli\u003eAmperage: 12.5 A\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 12 lbs\u003c\/li\u003e\n  \u003cli\u003eColor: Northern White\u003c\/li\u003e\n  \u003cli\u003eMaterial: Painted Steel Front\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360081922\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFan-forced heating with fast response open coil element for instantaneous heat and low maintenance\u003c\/li\u003e\n  \u003cli\u003eShallow recessed wall mount design for manufactured homes and shallow wall applications\u003c\/li\u003e\n  \u003cli\u003eBuilt-in double-pole thermostat for precise temperature control\u003c\/li\u003e\n  \u003cli\u003eDual protection with thermal cutout and one-time thermal fuse for safety\u003c\/li\u003e\n  \u003cli\u003eField wiring compartment to facilitate ease of installation\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with built-in or wall-mounted thermostats\u003c\/li\u003e\n  \u003cli\u003eETL listed for safety compliance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100244\/BERCOME00099_20.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100002\/QMARMAINST00077.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100244\/QMARMAE00363_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45854988730593,"sku":"98259","price":487.22,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98259_image1_257b5532-2647-4e8f-80b8-1a288717a3ae.jpg?v=1787830431"},{"product_id":"marley-efft1-single-pole-t-stat-field-installed","title":"MARLEY EFFT1 SINGLE POLE T-STAT. (FIELD INSTALLED)","description":"\u003ch2\u003eMARLEY EFFT1 SINGLE POLE T-STAT. (FIELD INSTALLED) ‚Äì Thermostat for Electrical Baseboard Heaters\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY EFFT1 is a single-pole thermostat designed for field installation in Marley Engineered Products' commercial electric baseboard heaters, such as the D Series. It provides reliable temperature control for efficient and safe operation of electric baseboard heating systems commonly used in commercial and residential applications. This thermostat is compatible with Marley baseboard heaters requiring thermostatic control and supports integration with wall-mounted or low voltage control systems.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part Number: EFFT1\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 1 lb\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360021027\u003c\/li\u003e\n  \u003cli\u003eThermostat Type: Single-pole\u003c\/li\u003e\n  \u003cli\u003eField Installed: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for use with Marley commercial baseboard heaters\u003c\/li\u003e\n  \u003cli\u003eCompatible with pneumatic, electric, or low voltage controls\u003c\/li\u003e\n  \u003cli\u003eFacilitates thermostatic control for efficient heating operation\u003c\/li\u003e\n  \u003cli\u003eSupports integration with computerized energy management systems\u003c\/li\u003e\n  \u003cli\u003eEnables safe and reliable temperature regulation for comfort heating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/MarleyEngineeredProducts-Qmark_00180_17_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100021\/MarleyEngineeredProducts-Qmark_00037_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/MarleyEngineeredProducts-Qmark_00184_1_2_SPEC.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855023464673,"sku":"97255","price":78.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97255_image1_57b73188-fd90-4339-a2e7-92a4b63e0f45.jpg?v=1787831021"},{"product_id":"marley-qch1151f-1-500-750w-at-120v-ceiling-mounted-heater-fan-forced","title":"MARLEY QCH1151F 1 500\/750W AT 120V CEILING MOUNTED HEATER FAN FORCED","description":"\u003ch2\u003eMARLEY QCH1151F 1 500\/750W Ceiling Mounted Heater Fan Forced - Electrical Distributor Heating Solutions\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY QCH1151F is a ceiling-mounted, fan-forced electric heater designed for residential and light commercial applications. It provides efficient heating for spaces such as dens, basements, garages, bathrooms, small offices, and workshops. This model is suitable for recessed or surface mounting with an optional frame and is intended for use with a remote wall thermostat (sold separately). It is UL Listed and engineered for reliable performance and safety.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eModel Number: QCH1151F\u003c\/li\u003e\n  \u003cli\u003ePower: 1500 watts full, 750 watts half (field convertible)\u003c\/li\u003e\n  \u003cli\u003eVoltage: 120 V\u003c\/li\u003e\n  \u003cli\u003eHeating Capacity: 5120 BTU\/hr\u003c\/li\u003e\n  \u003cli\u003eCurrent Draw: 12.5 amps\u003c\/li\u003e\n  \u003cli\u003eWeight: 10 lbs\u003c\/li\u003e\n  \u003cli\u003eMounting: Ceiling recessed or surface mount (with optional frame)\u003c\/li\u003e\n  \u003cli\u003eMaterial: Rugged steel fins copper-brazed to steel sheathed tubular heating elements\u003c\/li\u003e\n  \u003cli\u003eFinish: Navajo White baked enamel commercial grade steel faceplate\u003c\/li\u003e\n  \u003cli\u003eSafety: Thermal cutout for overheating protection, UL Listed (File #E21609)\u003c\/li\u003e\n  \u003cli\u003eFan Motor: Totally enclosed, permanently lubricated with fan delay control\u003c\/li\u003e\n  \u003cli\u003eInstallation: Back box included for recessed mounting; surface mounting frame available as accessory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFan-forced heating provides rapid and uniform heat distribution\u003c\/li\u003e\n  \u003cli\u003eAutomatic fan delay to ensure fan operates only when heating element is warm\u003c\/li\u003e\n  \u003cli\u003eThermal cutout shuts heater off automatically in case of overheating\u003c\/li\u003e\n  \u003cli\u003eDisconnect switch factory installed and concealed behind faceplate for safety\u003c\/li\u003e\n  \u003cli\u003eThree-piece design: back box, heater assembly, and snap-on faceplate for easy installation and maintenance\u003c\/li\u003e\n  \u003cli\u003eFactory wired for full wattage with option to convert to half wattage by removing red jumper\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with single-pole wall thermostat (not included)\u003c\/li\u003e\n  \u003cli\u003eSurface mounting frame and T-bar frame kit available for flexible installation options\u003c\/li\u003e\n  \u003cli\u003eBack box constructed of 20-gauge galvanized steel with knockouts for wiring\u003c\/li\u003e\n  \u003cli\u003eCommercial grade steel construction with baked enamel finish for durability\u003c\/li\u003e\n  \u003cli\u003e5-year warranty on heating elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00294_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/BERCOMINST00031.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00294_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855054463201,"sku":"98151","price":521.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98151_image1_cf60b574-74a4-48c1-8290-e3445e9922b9.jpg?v=1787831546"},{"product_id":"marley-icg18041-1-8-kw-at-240v-1ph-explosion-proof-convector-t2a-temperature-rating","title":"MARLEY ICG18041 1.8 KW AT 240V 1PH EXPLOSION PROOF CONVECTOR -T2A TEMPERATURE RATING","description":"\u003ch2\u003eMARLEY ICG18041 Explosion Proof Convector Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY ICG18041 is a 1.8 kW, 240V, single-phase explosion proof convector heater designed for hazardous locations classified under Class I, Groups B, C, and D, Division 1 and 2 environments. This convector heater is suitable for industrial applications such as petroleum refineries, gasoline storage and dispensing areas, petrochemical plants, dry cleaning facilities, natural gas plants, aircraft hangars, and other volatile environments. It provides reliable heating with a T2A temperature rating of 536¬∞F (280¬∞C), ensuring safe operation in areas with flammable gases or vapors. The unit is constructed with corrosion-resistant heavy gauge steel and includes explosion proof junction boxes for safe wiring, making it a dependable choice for electrical distributors, lighting solutions providers, wire and cable suppliers, and switchgear suppliers servicing hazardous area requirements.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n\u003cli\u003eModel Number: ICG18041\u003c\/li\u003e\n\u003cli\u003ePower: 1.8 kW\u003c\/li\u003e\n\u003cli\u003eVoltage: 240 V\u003c\/li\u003e\n\u003cli\u003ePhase: Single-phase (1PH)\u003c\/li\u003e\n\u003cli\u003eTemperature Rating: T2A (536¬∞F \/ 280¬∞C)\u003c\/li\u003e\n\u003cli\u003eAmperage: 7.5 Amps\u003c\/li\u003e\n\u003cli\u003eHeat Output: 6,140 BTU\u003c\/li\u003e\n\u003cli\u003eWeight: 46 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 34\" Length x 20\" Height x 9\" Width\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy 16 gauge steel with polyester powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExplosion proof junction box included for conduit entry and ease of wiring\u003c\/li\u003e\n\u003cli\u003eHeavy gauge steel construction with excellent corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHigh-quality, long-life tubular heating elements with high-grade resistance wire embedded in magnesium oxide (MGO) and finned sheath for efficient heat transfer\u003c\/li\u003e\n\u003cli\u003eIntegral mounting brackets for easy wall installation\u003c\/li\u003e\n\u003cli\u003eSloped top cabinet design to prevent objects from restricting airflow\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured to meet hazardous location requirements for Class I, Groups B, C, and D environments\u003c\/li\u003e\n\u003cli\u003eSuitable for use in volatile environments such as petroleum refineries, gasoline storage, petrochemical plants, and aircraft hangars\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/BERCOME00073_32.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100002\/QMARMAINST00078.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100072\/QMARMAE00148_1.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855060590817,"sku":"97665","price":2940.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97665_image1_5f7ab0b4-23ad-41e6-9472-4821a1e6d90e.jpg?v=1787831632"},{"product_id":"marley-ssar4808-1800-4800w-at-208v-smart-series-artisan-architectural-wall-heater-northern-white","title":"MARLEY SSAR4808 1800 - 4800W AT 208V SMART SERIES ARTISAN ARCHITECTURAL WALL HEATER - NORTHERN WHITE","description":"\u003ch2\u003eMARLEY SSAR4808 1800 - 4800W Architectural Wall Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY SSAR4808 is a Smart Series architectural programmable wall heater designed for efficient comfort heating in commercial and residential applications. It offers precise heat output control, energy savings, and integration capabilities suitable for electrical distributors, lighting solutions providers, wire and cable professionals, and switchgear suppliers involved in building management systems.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n\u003cli\u003eModel Number: SSAR4808\u003c\/li\u003e\n\u003cli\u003eVoltage: 208 V\u003c\/li\u003e\n\u003cli\u003eWattage: 1800 - 4800 W\u003c\/li\u003e\n\u003cli\u003eMaximum Amps: 23.1 A\u003c\/li\u003e\n\u003cli\u003eMaximum BTU\/hr: 16,378\u003c\/li\u003e\n\u003cli\u003eDimensions: 19.25‚Äù H x 15.85‚Äù W x 6.25‚Äù D (489 mm x 403 mm x 159 mm)\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 25 lbs\u003c\/li\u003e\n\u003cli\u003eStandard Grille Color: Northern White (other colors available: Bronze, Navajo White, Aluminum)\u003c\/li\u003e\n\u003cli\u003eThermostat Range: 40¬∞-99¬∞F (4¬∞-37¬∞C)\u003c\/li\u003e\n\u003cli\u003eThermostat Accuracy: ¬±1.5¬∞F\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-Year Element Warranty\u003c\/li\u003e\n\u003cli\u003eUPC: 685360156750\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 day \/ 2 day programmable scheduling for energy savings\u003c\/li\u003e\n\u003cli\u003eBuilding Management System (BMS) connection via dry contact for centralized control\u003c\/li\u003e\n\u003cli\u003eSecurity lockout function to prevent unauthorized changes\u003c\/li\u003e\n\u003cli\u003eEasy ‚Äúright out of the box‚Äù setup with LCD touch screen and night light feature\u003c\/li\u003e\n\u003cli\u003ePremium heavy-duty cast aluminum grille for durability and architectural styling\u003c\/li\u003e\n\u003cli\u003eFan-only mode for supplemental ventilation without heat\u003c\/li\u003e\n\u003cli\u003eOn\/off switch with remote control capability for convenient adjustments\u003c\/li\u003e\n\u003cli\u003e2-piece construction for simplified installation\u003c\/li\u003e\n\u003cli\u003ePrecise proportional heat control maintaining set temperature within 1.5¬∞F\u003c\/li\u003e\n\u003cli\u003eEnergy-efficient operation with automatic wattage adjustment\u003c\/li\u003e\n\u003cli\u003eRed alarm light and manual reset thermal limit control for overheat protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00302_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/QMARMAINST00120.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00302_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855085396193,"sku":"98377","price":1281.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98377_image1_83a39316-3786-4a4c-9442-5c3d5401bf8f.jpg?v=1787832041"},{"product_id":"marley-muh0521-5kw-at-240v-3-7kw-at-208v-1-3ph-horizontal-downflow-unit-heater","title":"MARLEY MUH0521 5KW AT 240V (3.7KW AT 208V) 1-3PH HORIZONTAL\/DOWNFLOW UNIT HEATER","description":"\u003ch2\u003eMARLEY MUH0521 5KW AT 240V (3.7KW AT 208V) 1-3PH HORIZONTAL\/DOWNFLOW UNIT HEATER - Industrial Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH0521 is a modular unit heater designed for industrial and commercial applications, providing efficient and reliable heating solutions for warehouses, factories, garages, shipping docks, stairwells, power stations, and mechanical rooms. This unit heater supports single-phase and three-phase power configurations and is suitable for horizontal or downflow mounting to deliver targeted airflow where needed. It is engineered for use by electrical distributors and switchgear suppliers seeking robust wire and cable-compatible heating equipment for demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePower: 5 kW at 240 V \/ 3.7 kW at 208 V\u003c\/li\u003e\n  \u003cli\u003eVoltage: 208\/240 V\u003c\/li\u003e\n  \u003cli\u003ePhase: 1-3 phase\u003c\/li\u003e\n  \u003cli\u003eAirflow (CFM): 350\u003c\/li\u003e\n  \u003cli\u003eDimensions (HxWxD): 16\" x 14\" x 7 1\/2\" (406.4 mm x 355.6 mm x 190.5 mm)\u003c\/li\u003e\n  \u003cli\u003eWeight: 27 lbs (12.2 kg)\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n  \u003cli\u003eControl Voltage: 208\/240 V\u003c\/li\u003e\n  \u003cli\u003eHeating Element: Steel sheath clad in copper with aluminum fins\u003c\/li\u003e\n  \u003cli\u003eMounting: Horizontal or downflow (vertical) with adjustable louvers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced Pull-Through Airflow Design: Draws air across the heating element for cooler operation and even heat distribution.\u003c\/li\u003e\n  \u003cli\u003eSafe Operation: Equipped with a linear thermal cutout for automatic protection along the entire heating element length and a 24V control transformer for safe temperature adjustment.\u003c\/li\u003e\n  \u003cli\u003ePrecise Airflow Positioning: Individually adjustable louvers direct heat where needed; venturi outlet allows vertical mounting.\u003c\/li\u003e\n  \u003cli\u003eDurable Heating Element: Steel sheath heating element clad in copper and outfitted with aluminum fins to enhance safety and accelerate cooling.\u003c\/li\u003e\n  \u003cli\u003eSelf-Contained Installation: No piping, flues, valves, or traps required for installation.\u003c\/li\u003e\n  \u003cli\u003eFlexible Wiring: Factory wired for single-phase power; field convertible to three-phase with simple reconnection instructions.\u003c\/li\u003e\n  \u003cli\u003eUL Listed for Safety Compliance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_44_45_121_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00104_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00326_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855145492705,"sku":"98059","price":956.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98059_image1_f75bb523-9d9c-4cf2-8a1c-76ea8ec401b0.jpg?v=1787832821"},{"product_id":"marley-fra1512f-1500-watts-at-120v-wall-heater-fan-forced","title":"MARLEY FRA1512F 1500 WATTS AT 120V WALL HEATER FAN FORCED","description":"\u003ch2\u003eMARLEY FRA1512F 1500 Watts at 120V Wall Heater Fan Forced\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY FRA1512F is a commercial-grade fan-forced wall heater designed for comfort heating in attics, basements, entryways, large rooms, offices, and remodels. Engineered by Marley Engineered Products, this 1500-watt heater operates at 120 volts and features a built-in fan delay switch to ensure uniform warmth distribution. It is suitable for electrical distributors and lighting solutions providers seeking reliable heating components for wire and cable or switchgear supplier applications.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eModel Number: FRA1512F\u003c\/li\u003e\n  \u003cli\u003eVoltage: 120 V\u003c\/li\u003e\n  \u003cli\u003ePower: 1500 Watts\u003c\/li\u003e\n  \u003cli\u003eAmps: 12.5\u003c\/li\u003e\n  \u003cli\u003ePhase: Single (1)\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 25 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions: 15-3\/4\" W x 19-5\/16\" H x 3-3\/4\" D (400mm x 490mm x 95mm)\u003c\/li\u003e\n  \u003cli\u003eMounting Clearance: Minimum 8\" from floor and adjacent walls, 36\" from ceiling\u003c\/li\u003e\n  \u003cli\u003eCompliance: ETL Listed for USA and Canada, conforms to ANSI\/UL2021 and CSA C22.2 No. 56\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCommercial grade steel grille for optimized airflow and comfort\u003c\/li\u003e\n  \u003cli\u003eBuilt-in fan delay switch energizes fan only after heating elements warm to prevent unheated air discharge\u003c\/li\u003e\n  \u003cli\u003eFan-only operation for summer use\u003c\/li\u003e\n  \u003cli\u003eIntegral double pole thermostat for easy room temperature adjustment\u003c\/li\u003e\n  \u003cli\u003eManual reset thermal overheat protector for safety, disconnecting power in case of overheating\u003c\/li\u003e\n  \u003cli\u003ePermanently lubricated, totally enclosed fan motor for long life and low maintenance\u003c\/li\u003e\n  \u003cli\u003eBuilt-in power disconnect switch for safe maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned for surface or semi-recessed mounting with available accessory frames and covers\u003c\/li\u003e\n  \u003cli\u003eApplications include attics, basements, entryways, large rooms, offices, and remodels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100141\/QMARMAE00243_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/QMARMAINST00116.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100141\/QMARMAE00243_1_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855190024417,"sku":"97331","price":696.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97331_image1_6d0e11fa-2987-457d-bdb3-7d03be5549bf.jpg?v=1787833625"},{"product_id":"cwh3404f-fan-forced-wall-heater","title":"CWH3404F, Fan Forced Wall Heater","description":"\u003ch2\u003eCWH3404F Fan Forced Wall Heater ‚Äì Commercial Fan-Forced Wall Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe CWH3404F is a recessed fan-forced wall heater designed for small area heating in commercial and mechanical spaces. Manufactured by Marley Engineered Products, this unit is suitable for wall mounting and provides efficient heating with optimized airflow. It is ideal for applications such as vestibules, entrance ways, lobbies, hallways, stairwells, restaurants, conference rooms, medical offices, basements, and family rooms. This heater is a reliable choice for electrical distributors and switchgear suppliers seeking quality heating solutions integrated with wire and cable infrastructure.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eModel Number: CWH3404F\u003c\/li\u003e\n  \u003cli\u003eVoltage: 240V \/ 208V\u003c\/li\u003e\n  \u003cli\u003eWattage: 4000\/2000 W (240V), 3000\/1500 W (208V)\u003c\/li\u003e\n  \u003cli\u003eCurrent: 16.7\/8.3 A (240V), 14.5\/7.2 A (208V)\u003c\/li\u003e\n  \u003cli\u003ePhase: Single-phase\u003c\/li\u003e\n  \u003cli\u003eMounting Type: Recessed\u003c\/li\u003e\n  \u003cli\u003eMaterial: Heavy Gauge Galvanized Steel\u003c\/li\u003e\n  \u003cli\u003eWeight: 25 lbs\u003c\/li\u003e\n  \u003cli\u003eThermostat Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n  \u003cli\u003eAir Movement: 100 CFM\u003c\/li\u003e\n  \u003cli\u003eDimensions: Grille ‚Äì 19-5\/16‚ÄùH x 15-3\/4‚ÄùW x 7\/8‚ÄùD; Back Box ‚Äì 18-1\/4\"H x 14-5\/16\"W x 3-3\/4\"D\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360162461\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-glowing 80\/20 nickel-chromium resistance wire heating element with copper-brazed plate fins for uniform air heating\u003c\/li\u003e\n  \u003cli\u003eHeavy gauge steel construction with powder paint finish for durability\u003c\/li\u003e\n  \u003cli\u003eDouble-pole, single-throw on\/off switch mounted on back box for positive power disconnect, concealed behind front cover\u003c\/li\u003e\n  \u003cli\u003eTotally enclosed, permanently lubricated fan motor with five-bladed aluminum fan for long life and low maintenance\u003c\/li\u003e\n  \u003cli\u003eBi-metallic snap-action fan control activates fan after element reaches operating temperature and continues operation until heat is fully discharged\u003c\/li\u003e\n  \u003cli\u003eThermal cutout safety feature to shut off heat in case of overheating\u003c\/li\u003e\n  \u003cli\u003eAutomatic fan delay eliminates cold drafts on startup and discharges residual heat during shutdown\u003c\/li\u003e\n  \u003cli\u003eIntegral double-pole thermostat for easy temperature adjustment\u003c\/li\u003e\n  \u003cli\u003eRecessed back box designed for masonry or frame installations with knockouts for power lead entry\u003c\/li\u003e\n  \u003cli\u003ePowder-coated louvered front cover with plug button to render thermostat knob tamper-resistant\u003c\/li\u003e\n  \u003cli\u003ecETLus listed for safety and performance compliance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/4855\/xlsx_trimble\/2debd8a7ebb318d0e5b9ec33d765aa131967a934.pdf?did=4169\u0026amp;pid=27681818\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpecification\/Technical\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/4855\/xlsx_trimble\/f556856998da26c88e1d1e07acc5085c708f79cd.pdf?did=4169\u0026amp;pid=27681818\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOther 1\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855206768865,"sku":"97207","price":795.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97207_image1_3b4d8efe-9596-4f85-b47a-8c9c85bd5c9d.jpg?v=1787833927"},{"product_id":"marley-muh0571-277v-unit-heater","title":"MARLEY MUH0571 277V Unit Heater","description":"\u003ch2\u003eMARLEY MUH0571 277V Unit Heater - Industrial Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH0571 277V Unit Heater is a rugged industrial heating solution designed for commercial and industrial spaces such as factories, warehouses, garages, stairwells, shipping docks, power stations, and mechanical rooms. This unit heater provides efficient and reliable warmth with a pull-through airflow design that ensures even heat distribution and cooler operation. It is suitable for electrical distributors and switchgear suppliers looking for robust heating equipment compatible with 277V electrical systems.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 277V\u003c\/li\u003e\n  \u003cli\u003ePhase: Single-phase\u003c\/li\u003e\n  \u003cli\u003ePower: 5 kW\u003c\/li\u003e\n  \u003cli\u003eAmperage: 18 amps\u003c\/li\u003e\n  \u003cli\u003eBTU\/hr: 17,000\u003c\/li\u003e\n  \u003cli\u003eControl Voltage: 277V\u003c\/li\u003e\n  \u003cli\u003eAirflow (CFM): 350\u003c\/li\u003e\n  \u003cli\u003eShipping Weight: 27 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions (HxWxD): 16\" x 14\" x 7.5\" (406.4 mm x 355.6 mm x 190.5 mm)\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n  \u003cli\u003eColor: Beige\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced Airflow: Pull-through design draws air across the heating element for cooler operation and even heat distribution.\u003c\/li\u003e\n  \u003cli\u003eSafe Operation: Linear thermal cutout provides automatic protection along the entire heating element length; includes a 24V control transformer for safer temperature adjustments.\u003c\/li\u003e\n  \u003cli\u003ePrecise Positioning: Equipped with individually adjustable louvers to direct warmth where needed; venturi outlet supports vertical mounting.\u003c\/li\u003e\n  \u003cli\u003eDurable Heating Element: Steel sheath heating element clad in copper and outfitted with aluminum fins for faster cooling and enhanced safety.\u003c\/li\u003e\n  \u003cli\u003eSelf-Contained Installation: No piping, flues, valves, or traps required; ready for immediate installation in various industrial settings.\u003c\/li\u003e\n  \u003cli\u003eCertified: UL Listed for safety compliance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_44_45_121_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00104_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00326_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855210373345,"sku":"388896","price":1014.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/388896_image1_7e312451-dbdc-4cb8-a553-8cca23573410.jpg?v=1787833978"},{"product_id":"marley-muh072-7-5kw-at-240v-5-6kw-at-208v-1-3ph-horizontal-downflow-unit-heater","title":"MARLEY MUH072 7.5KW AT 240V (5.6KW AT 208V) 1-3PH HORIZONTAL\/DOWNFLOW UNIT HEATER","description":"\u003ch2\u003eMARLEY MUH072 7.5KW Unit Heater ‚Äì Industrial Heating Solutions\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH072 is a robust 7.5KW electric unit heater designed for industrial and commercial environments, offering reliable heating for spaces such as factories, warehouses, garages, stairwells, shipping docks, power stations, and mechanical rooms. This horizontal\/downflow unit heater operates efficiently at 240V (5.6KW at 208V), providing powerful airflow and heat distribution, making it suitable for electrical distributors and lighting solutions providers seeking dependable wire and cable-compatible heating equipment or switchgear supplier applications.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel Number: MUH072\u003c\/li\u003e\n  \u003cli\u003ePower Output: 7.5KW at 240V \/ 5.6KW at 208V\u003c\/li\u003e\n  \u003cli\u003eVoltage: 208\/240V\u003c\/li\u003e\n  \u003cli\u003ePhase: 1-3 Phase\u003c\/li\u003e\n  \u003cli\u003eAmperage: 27.0\/31.3 Amps\u003c\/li\u003e\n  \u003cli\u003eControl Voltage: 24V\u003c\/li\u003e\n  \u003cli\u003eAirflow: 650 CFM\u003c\/li\u003e\n  \u003cli\u003eShipping Weight: 38 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions: Height 21 3\/4\", Width 19\", Depth 7 1\/2\"\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n  \u003cli\u003eCFM Range: 350‚Äì3000\u003c\/li\u003e\n  \u003cli\u003eColor Options: Beige, Bronze\u003c\/li\u003e\n  \u003cli\u003eUL Listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced Pull-Through Airflow Design: Draws air across the heating element for cooler operation and even heat distribution.\u003c\/li\u003e\n  \u003cli\u003eSafe Operation: Equipped with a linear thermal cutout for automatic protection along the heating element and a 24V control transformer for safe temperature adjustment.\u003c\/li\u003e\n  \u003cli\u003ePrecise Positioning: Individually adjustable louvers allow targeted heat direction; venturi outlet supports vertical mounting.\u003c\/li\u003e\n  \u003cli\u003eDurable Heating Element: Steel sheath heating element clad in copper and outfitted with aluminum fins for enhanced safety and rapid cooling.\u003c\/li\u003e\n  \u003cli\u003eReady for Installation: Self-contained unit heater requiring no piping, flues, valves, or traps, simplifying installation.\u003c\/li\u003e\n  \u003cli\u003eVersatile Mounting: Supports both horizontal and vertical discharge with detailed mounting options including threaded rod mounting and optional pivoting brackets.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Single or Three-Phase Power: Factory wired for single-phase with easy field wiring for three-phase applications.\u003c\/li\u003e\n  \u003cli\u003eComprehensive Safety and Maintenance Instructions Provided: Includes manual reset safety limit, detailed wiring diagrams, and cleaning guidelines to ensure long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_44_45_121_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00104_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00326_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855210537185,"sku":"98068","price":1475.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98068_image1_f97d5707-be1c-437f-af5a-494328c00ca5.jpg?v=1787833985"},{"product_id":"marley-muh0341-3kw-at-480v-3ph-horizontal-downflow-unit-heater","title":"MARLEY MUH0341 3KW AT 480V 3PH HORIZONTAL\/DOWNFLOW UNIT HEATER","description":"\u003ch2\u003eMARLEY MUH0341 3KW AT 480V 3PH HORIZONTAL\/DOWNFLOW UNIT HEATER - Industrial Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH0341 is a 3 kW, 480V, 3-phase unit heater designed for efficient heating in industrial and commercial spaces. This horizontal\/downflow modular unit heater is suitable for factories, warehouses, garages, stairwells, shipping docks, power stations, and mechanical rooms. It offers reliable heating solutions for electrical distributors and switchgear suppliers requiring durable unit heaters for wire and cable environments.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: MUH0341\u003c\/li\u003e\n  \u003cli\u003ePower: 3 kW\u003c\/li\u003e\n  \u003cli\u003eVoltage: 480V\u003c\/li\u003e\n  \u003cli\u003ePhase: 3-phase\u003c\/li\u003e\n  \u003cli\u003eAir Delivery: 350 CFM\u003c\/li\u003e\n  \u003cli\u003eTemperature Rise: 27¬∞F\u003c\/li\u003e\n  \u003cli\u003eFan Speed: 1600 RPM\u003c\/li\u003e\n  \u003cli\u003eFan Motor Horsepower: 1\/100 HP\u003c\/li\u003e\n  \u003cli\u003eWire Size: 14 AWG\u003c\/li\u003e\n  \u003cli\u003eWeight: 27 lbs\u003c\/li\u003e\n  \u003cli\u003eMounting: Horizontal\/Downflow\u003c\/li\u003e\n  \u003cli\u003eDimensions: Height 30 in, Width 26-5\/8 in, Depth 7-1\/2 in (from installation manual)\u003c\/li\u003e\n  \u003cli\u003eMaterial: 20-gauge steel case\u003c\/li\u003e\n  \u003cli\u003eColor: Neutral Gray\/Statuary Bronze\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced pull-through airflow design for even air distribution and cooler element operation\u003c\/li\u003e\n  \u003cli\u003eAluminum-finned, copper-clad steel sheath heating element for extended life and faster heat dissipation\u003c\/li\u003e\n  \u003cli\u003eCompletely enclosed fan motor for durability\u003c\/li\u003e\n  \u003cli\u003eIndividual stainless steel adjustable louvers to direct airflow\u003c\/li\u003e\n  \u003cli\u003e24V control transformer standard, providing safer and more accurate temperature control\u003c\/li\u003e\n  \u003cli\u003eAutomatic reset linear thermal cut-out for over-temperature protection\u003c\/li\u003e\n  \u003cli\u003eNo piping, flues, valves, or traps required for installation\u003c\/li\u003e\n  \u003cli\u003eField-installable optional control kits increase adaptability\u003c\/li\u003e\n  \u003cli\u003eBranch circuit fusing available when required\u003c\/li\u003e\n  \u003cli\u003eMounting options include wall, ceiling, or vertical mounting with optional brackets\u003c\/li\u003e\n  \u003cli\u003eSuitable for use in industrial and commercial environments with proper electrical wiring per NEC standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100244\/QMARMAE00335_1-4.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100006\/QMARMAINST00101.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100244\/QMARMAE00335_1-4.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855226429665,"sku":"98010","price":1236.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/98010_image1_a021d2c1-9bb5-4dcb-8553-b696fc64c5a1.jpg?v=1787834245"},{"product_id":"marley-muh504-480v-unit-heater","title":"MARLEY MUH504 480V Unit Heater","description":"\u003ch2\u003eMARLEY MUH504 480V Unit Heater - Industrial Unit Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY MUH504 480V Unit Heater is a rugged, self-contained unit heater designed for industrial heating applications such as factories, warehouses, garages, stairwells, shipping docks, power stations, and mechanical rooms. This unit heater provides powerful output capacity suitable for indoor and indoor\/outdoor transition spaces, offering efficient and reliable heating without the need for piping, flues, valves, or traps. It is ideal for electrical distributors and switchgear suppliers looking for robust heating solutions integrated with wire and cable systems.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 480V\u003c\/li\u003e\n  \u003cli\u003ePhase: 3\u003c\/li\u003e\n  \u003cli\u003ePower: 50 kW\u003c\/li\u003e\n  \u003cli\u003eAmps: 60.2\u003c\/li\u003e\n  \u003cli\u003eBTU\/hr: 171,000\u003c\/li\u003e\n  \u003cli\u003eControl Voltage: 24V\u003c\/li\u003e\n  \u003cli\u003eCFM (Airflow): 3000\/2600\u003c\/li\u003e\n  \u003cli\u003eShipping Weight: 114 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions (HxWxD): 30\" x 26 5\/8\" x 17 1\/8\"\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40¬∞‚Äì90¬∞F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced airflow with pull-through design for cooler operation and even heat distribution.\u003c\/li\u003e\n  \u003cli\u003eLinear thermal cutout for automatic protection along the entire heating element.\u003c\/li\u003e\n  \u003cli\u003e24V control transformer for safer temperature adjustment.\u003c\/li\u003e\n  \u003cli\u003eIndividually adjustable louvers for precise positioning of heat output.\u003c\/li\u003e\n  \u003cli\u003eVenturi outlet for additional airflow to support vertical mounting.\u003c\/li\u003e\n  \u003cli\u003eSteel sheath heating element clad in copper with aluminum fins for enhanced safety and faster cooldown.\u003c\/li\u003e\n  \u003cli\u003eSelf-contained design requiring no external piping, flues, valves, or traps for easy installation.\u003c\/li\u003e\n  \u003cli\u003eUL listed for safety compliance.\u003c\/li\u003e\n  \u003cli\u003eAvailable in Beige and Bronze colors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00252_44_45_121_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100026\/MarleyEngineeredProducts-Berko_00104_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100466\/MarleyEngineeredProducts-Berko_00326_1-4_DATA.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855232753889,"sku":"392384","price":9975.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/392384_image1_613216e7-3cd1-4838-a756-800ba2d75c79.jpg?v=1787834308"},{"product_id":"marley-cdft-thermostat-spst-range-45-to-95f","title":"MARLEY CDFT THERMOSTAT SPST RANGE 45 TO 95F.","description":"\u003ch2\u003eMARLEY CDFT Thermostat SPST Range 45 to 95¬∞F - Electrical Distributor Control Component\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY CDFT Thermostat is a single-pole, single-throw (SPST) control device designed for temperature regulation within a range of 45 to 95 degrees Fahrenheit. It is intended for integration with Marley Engineered Products‚Äô heating solutions, facilitating precise temperature control in commercial electrical heating applications. This thermostat is suitable for use by electrical distributors and switchgear suppliers requiring reliable wire and cable compatible control components.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Marley Engineered Products\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part #: CDFT\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 45 to 95¬∞F (7 to 35¬∞C)\u003c\/li\u003e\n  \u003cli\u003eType: Single Pole Single Throw (SPST) Thermostat\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 1 lb\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360015033\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple ON\/OFF temperature control for heating applications\u003c\/li\u003e\n  \u003cli\u003eCompatible with Marley 500 Series Ceiling Mounted Fan Forced Heaters\u003c\/li\u003e\n  \u003cli\u003eDesigned for commercial use with Marley heating sections and enclosures\u003c\/li\u003e\n  \u003cli\u003eFacilitates efficient temperature regulation in wire and cable connected heating systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/MarleyEngineeredProducts-Qmark_00180_16_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100021\/MarleyEngineeredProducts-Qmark_00035_INST.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/MarleyEngineeredProducts-Qmark_00182_1_2_SPEC.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855257362657,"sku":"97103","price":200.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/97103_image1_790c6421-44a8-4df0-8133-4fb5fa07ec3b.jpg?v=1787834707"},{"product_id":"marley-guxcmo-clg-hang-mounting-kit","title":"MARLEY GUXCMO Clg\/Hang Mounting Kit","description":"\u003ch2\u003eMARLEY GUXCMO Clg\/Hang Mounting Kit for Explosion Proof Unit Heaters\u003c\/h2\u003e\n\n\u003cp\u003eThe MARLEY GUXCMO Ceiling\/Hang Mounting Kit is designed for secure installation of Marley X Series explosion proof unit heaters. It provides a robust mounting solution for ceiling or hanging applications, suitable for hazardous location heating equipment. This mounting kit supports the combined weight of the heater and mounting hardware, ensuring stability and safety in industrial environments served by electrical distributors and lighting solutions providers.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer Part #: GUXCMO\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 5.0000 lbs\u003c\/li\u003e\n  \u003cli\u003eUPC: 685360033785\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with all Marley X Series explosion proof unit heater models\u003c\/li\u003e\n  \u003cli\u003eIncludes hanger bracket, hanger turnbuckle, cross bolts, nuts, and washers for secure installation\u003c\/li\u003e\n  \u003cli\u003eDesigned to support heater weight and withstand vibration and cantilevered loading\u003c\/li\u003e\n  \u003cli\u003eSupplied hardware includes 5\/8” rods and 1\/2” mounting bolts with lock washers and nuts\u003c\/li\u003e\n  \u003cli\u003eEnsures proper mounting clearances and stability in ceiling or hanging applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/BERCOME00073_30.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/INSTALLATIONSHEETS\/DIR100002\/QMARMAINST00086.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100143\/QMARMAE00289_1.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marley Engineered Products","offers":[{"title":"Default Title","offer_id":45855299076321,"sku":"382119","price":238.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/ULE_5b254663-58b2-4736-a96f-48b9e7925688.jpg?v=1787835307"},{"product_id":"06916002-wall-heater-surface-mounting-sleeve","title":"06916002, Wall Heater Surface Mounting Sleeve","description":"\u003ch2\u003e06916002 Wall Heater Surface Mounting Sleeve – Electrical Distributor Heating Solutions\u003c\/h2\u003e\n\n\u003cp\u003eThe 06916002 Wall Heater Surface Mounting Sleeve by TPI is designed for surface mounting of wall heaters, providing a secure and durable enclosure for electric heating units. Suitable for applications requiring non-recessed or semi-recessed installation, this mounting sleeve supports efficient heat distribution in commercial and industrial environments. It is an essential component for electrical distributors and switchgear suppliers involved in wire and cable installation and lighting solutions where integrated heating is required.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: TPI\u003c\/li\u003e\n\u003cli\u003eManufacturer Part #: 06916002\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 4.0000 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 686334691604\u003c\/li\u003e\n\u003cli\u003eConstruction: Heavy 16 gauge steel\u003c\/li\u003e\n\u003cli\u003eFinish: Powder coated paint\u003c\/li\u003e\n\u003cli\u003eMounting Type: Surface mount for wall heaters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDurable steel construction ensures long-lasting performance\u003c\/li\u003e\n\u003cli\u003ePowder coated finish provides corrosion resistance\u003c\/li\u003e\n\u003cli\u003eCompatible with surface mounting applications for wall heaters\u003c\/li\u003e\n\u003cli\u003eSupports both non-recessed and semi-recessed heater installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/4855\/xlsx_trimble\/7c0b24beff9906ba270c7f1e9780203b522ae231.pdf?did=4169\u0026amp;pid=27692701\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eData Sheet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/4855\/xlsx_trimble\/f117ff7abd2196822c55f0cd2e42a0193658847f.pdf?did=4169\u0026amp;pid=27692701\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWarranty\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/4855\/xlsx_trimble\/38ca436b31c8fd6ec9f1bd5876d16a3f212555b4.pdf?did=4169\u0026amp;pid=27692701\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation\/Operator\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TPI","offers":[{"title":"Default Title","offer_id":45855532515553,"sku":"167448","price":204.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/167448_image1_38023525-7e9b-41d0-af4c-f768b5d7b70f.jpg?v=1787820219"},{"product_id":"06927802-line-voltage-thermostat","title":"06927802, Line Voltage Thermostat","description":"\u003ch2\u003e06927802, Line Voltage Thermostat for Electrical Control\u003c\/h2\u003e\n\n\u003cp\u003eThe 06927802 Line Voltage Thermostat by TPI is designed for precise temperature control in electrical heating applications. Suitable for use with line voltage systems, this thermostat supports up to 25 amperes and operates within a temperature range of 40 to 120 degrees Fahrenheit. It is ideal for integration by electrical distributors and switchgear suppliers requiring reliable control components for heating and lighting solutions.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: TPI\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part #: 06927802\u003c\/li\u003e\n  \u003cli\u003eCurrent Rating: 25 amperes\u003c\/li\u003e\n  \u003cli\u003eOperating Voltage: 120-277V\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40-120 °F\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 2.0 lbs\u003c\/li\u003e\n  \u003cli\u003eUPC: 686334692786\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble Pole Single Throw (DPST) line duty thermostat\u003c\/li\u003e\n  \u003cli\u003eDesigned for line voltage control applications\u003c\/li\u003e\n  \u003cli\u003eCompatible with a wide range of electrical heating equipment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/TPICorp-MarkelProductsCo_00005_17_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TPI","offers":[{"title":"Default Title","offer_id":45855601492193,"sku":"167773","price":349.33,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/167773_image1_5ef85115-f8a0-4070-9878-2675168fd033.jpg?v=1787821557"},{"product_id":"tpi-f4420t2rp-2000w-208v-low-profile-commercial-fan-forced-wall-htr-dp-stat-ivory-w-box","title":"TPI F4420T2RP 2000W 208V LOW PROFILE COMMERCIAL FAN FORCED WALL HTR DP STAT IVORY W BOX","description":"\u003ch2\u003eTPI F4420T2RP 2000W 208V Low Profile Commercial Fan Forced Wall Heater\u003c\/h2\u003e\n\n\u003cp\u003eThis TPI low profile fan forced wall heater is designed for commercial heating applications, providing efficient and reliable heat output. It is suitable for electrical distributors and lighting solutions providers seeking compact, wall-mounted heating units compatible with 208V power supply. The unit features a durable powder-coated steel front and a built-in double pole thermostat for precise temperature control.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer Part #: F4420T2RP\u003c\/li\u003e\n  \u003cli\u003eVoltage: 208V\u003c\/li\u003e\n  \u003cli\u003eWattage: 2000W\u003c\/li\u003e\n  \u003cli\u003eWeight: 9 lbs\u003c\/li\u003e\n  \u003cli\u003eMax BTU Output: 6826\u003c\/li\u003e\n  \u003cli\u003eAmperage: 9.6A\u003c\/li\u003e\n  \u003cli\u003eDimensions (Rough-in): 14-1\/2” Wide, 7-1\/8” High, 3-1\/2” Deep\u003c\/li\u003e\n  \u003cli\u003eGrill Dimensions: 16-3\/4” Wide, 7-5\/8” High\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLow profile design suitable for commercial wall mounting\u003c\/li\u003e\n  \u003cli\u003ePowder coated 20 gauge steel front for durability\u003c\/li\u003e\n  \u003cli\u003eManual reset thermal limit for safety\u003c\/li\u003e\n  \u003cli\u003eFinned tubular steel heating element\u003c\/li\u003e\n  \u003cli\u003ePropeller style fan blade operating at 2200 RPM delivering 70 CFM airflow\u003c\/li\u003e\n  \u003cli\u003eUnit can be positioned for left, right, or top discharge\u003c\/li\u003e\n  \u003cli\u003eIncludes double pole built-in thermostat with temperature range 50° - 90°F\u003c\/li\u003e\n  \u003cli\u003eNot approved for ceiling mount applications\u003c\/li\u003e\n  \u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100134\/TPITPIE00368_47.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TPI","offers":[{"title":"Default Title","offer_id":45855681020129,"sku":"167539","price":649.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/167539_image1_5fa464ca-fb7a-4f96-8f04-cc1af1b540a1.jpg?v=1787823008"},{"product_id":"tpi-h3032dwbw-750-1000-1500-2000-w-208-240v-fan-forced-ceiling-htr-w-back-can-and-disconnect","title":"TPI H3032DWBW 750\/1000\/1500\/2000 W 208\/240V FAN FORCED CEILING HTR W\/BACK CAN AND DISCONNECT","description":"\u003ch2\u003eTPI H3032DWBW Fan Forced Ceiling Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe TPI H3032DWBW is a fan forced ceiling heater designed for efficient heating in commercial and industrial applications. This unit offers selectable wattages of 750, 1000, 1500, or 2000 watts and operates at 208\/240 volts. It is suitable for electrical distributors and switchgear suppliers seeking reliable heating solutions for ceiling installation. The heater includes a back can and disconnect switch for ease of installation and maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer Part #: H3032DWBW\u003c\/li\u003e\n  \u003cli\u003eSelectable Wattages: 750 \/ 1000 \/ 1500 \/ 2000 W\u003c\/li\u003e\n  \u003cli\u003eVoltage: 208 \/ 240 V\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 6 lbs\u003c\/li\u003e\n  \u003cli\u003eUPC: 686334948883\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFan purge circuit with 2-wire control for use with remote wall thermostat\u003c\/li\u003e\n  \u003cli\u003eDisconnect switch included\u003c\/li\u003e\n  \u003cli\u003eWhite powder coated 18 gauge steel grill\u003c\/li\u003e\n  \u003cli\u003eManual reset thermal limit for safety\u003c\/li\u003e\n  \u003cli\u003eSteel block fin heating element for quick heat transfer\u003c\/li\u003e\n  \u003cli\u003eVane axial fan blade driven by a low speed motor delivering 175 CFM airflow\u003c\/li\u003e\n  \u003cli\u003eSelectable wattage configured at time of installation, shipped wired to highest wattage\u003c\/li\u003e\n  \u003cli\u003eDrywall depth embossments on back can\u003c\/li\u003e\n  \u003cli\u003eMade in U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100133\/TPITPIE00363_34.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TPI","offers":[{"title":"Default Title","offer_id":45855701991649,"sku":"167584","price":526.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/167584_image1_f91ecf1f-ea79-4064-ac78-671cab78e672.jpg?v=1787823518"},{"product_id":"03298902-4400ex32-wall-heater-frame","title":"03298902-(4400EX32), Wall Heater Frame","description":"\u003ch2\u003e03298902-(4400EX32) Wall Heater Frame – Surface Mounting Frame for Electrical Distributor\u003c\/h2\u003e\n\n\u003cp\u003eThe 03298902-(4400EX32) Wall Heater Frame is a 4-inch surface mounting frame designed for use with the 4400 Series Low Profile Commercial Fan Forced Wall Heater. It provides a durable and precise mounting solution for non-recessed and semi-recessed applications, suitable for electrical distributors and lighting solutions requiring reliable wire and cable management and switchgear integration.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: TPI\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part Number: 03298902-(4400EX32)\u003c\/li\u003e\n  \u003cli\u003eWeight: 9 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions: 14 ½” Wide x 7 ⅛” High x 3 ½” Deep (rough-in dimensions for heater compatibility)\u003c\/li\u003e\n  \u003cli\u003eMaterial: Powder coated 20 gauge steel with extruded aluminum frame\u003c\/li\u003e\n  \u003cli\u003eCompatible with 4400 Series Low Profile Commercial Fan Forced Wall Heater\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface mounting frame for secure installation of wall heaters\u003c\/li\u003e\n  \u003cli\u003eDesigned for non-recessed and semi-recessed wall heater applications\u003c\/li\u003e\n  \u003cli\u003eConstructed with powder coated steel and extruded aluminum for durability\u003c\/li\u003e\n  \u003cli\u003eSupports left, right, or top discharge heater positioning\u003c\/li\u003e\n  \u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/4855\/xlsx_trimble\/ebfa1a7671ea1665806cbf5a8e85368dc8662f35.pdf?did=4169\u0026amp;pid=27692582\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCatalog\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/media.distributordatasolutions.com\/4855\/xlsx_trimble\/a9714d0888ed80779a4863d2605beb1f571047b8.pdf?did=4169\u0026amp;pid=27692582\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eData Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TPI","offers":[{"title":"Default Title","offer_id":45855734300897,"sku":"167456","price":104.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/167456_image1_32609aa8-a0a7-42b1-81a8-ba49556303ed.jpg?v=1787824181"},{"product_id":"tpi-hf4310t2rpw-1000-750w-240-208v-low-profile-fan-forced-wall-htr-dp-stat-white-w-box","title":"TPI HF4310T2RPW 1000\/750W 240\/208V LOW PROFILE FAN FORCED WALL HTR DP STAT WHITE W BOX","description":"\u003ch2\u003eTPI HF4310T2RPW Low Profile Fan Forced Wall Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe TPI HF4310T2RPW is a low profile fan forced wall heater designed for efficient space heating in commercial and residential applications. This unit is suitable for electrical distributors and lighting solutions providers offering wire and cable and switchgear components that complement HVAC installations. It features a built-in double pole thermostat and is engineered for wall mounting with flexible discharge options.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: TPI\u003c\/li\u003e\n  \u003cli\u003eModel Number: HF4310T2RPW\u003c\/li\u003e\n  \u003cli\u003eVoltage: 240\/208V\u003c\/li\u003e\n  \u003cli\u003eWattage: 1000\/750W\u003c\/li\u003e\n  \u003cli\u003eMaximum BTU Output: 3413 \/ 2560\u003c\/li\u003e\n  \u003cli\u003eAmperage: 4.2 \/ 3.6 A\u003c\/li\u003e\n  \u003cli\u003eWeight: 9 lbs\u003c\/li\u003e\n  \u003cli\u003eDimensions (Rough-in): 14-1\/2” Wide, 7-1\/8” High, 3-1\/2” Deep\u003c\/li\u003e\n  \u003cli\u003eGrill Dimensions: 16-3\/4” Wide, 7-5\/8” High\u003c\/li\u003e\n  \u003cli\u003eFan Speed: 2200 RPM\u003c\/li\u003e\n  \u003cli\u003eAirflow: 70 CFM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLow profile design suitable for wall mounting\u003c\/li\u003e\n  \u003cli\u003ePowder coated 20 gauge steel front panel\u003c\/li\u003e\n  \u003cli\u003eManual reset thermal limit for safety\u003c\/li\u003e\n  \u003cli\u003eFinned tubular steel heating element for efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003ePropeller style fan blade for effective air circulation\u003c\/li\u003e\n  \u003cli\u003eUnit can be positioned for left, right, or top air discharge\u003c\/li\u003e\n  \u003cli\u003eNot approved for ceiling mount applications\u003c\/li\u003e\n  \u003cli\u003eAvailable in white finish\u003c\/li\u003e\n  \u003cli\u003eIncludes built-in double pole thermostat with 50° - 90°F range\u003c\/li\u003e\n  \u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100134\/TPITPIE00368_47.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TPI","offers":[{"title":"Default Title","offer_id":45855753339105,"sku":"167612","price":487.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/167612_image1_cb1575d9-a90e-493d-9cc6-1223d8bdee15.jpg?v=1787824694"},{"product_id":"tpi-h3422t-2000w-240v-heavy-duty-fan-forced-wall-htr-back-can","title":"TPI H3422T 2000W 240V HEAVY DUTY FAN FORCED WALL HTR \u0026 BACK CAN","description":"\u003ch2\u003eTPI H3422T 2000W 240V Heavy Duty Fan Forced Wall Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe TPI H3422T is a heavy-duty fan forced wall heater designed for reliable heating in commercial and industrial environments. This unit is suitable for electrical distributors and lighting solutions providers requiring robust wire and cable-compatible heating equipment. It operates at 2000 watts and 240 volts, delivering efficient heat output with integrated safety and control features.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: H3422T\u003c\/li\u003e\n  \u003cli\u003ePower: 2000 Watts\u003c\/li\u003e\n  \u003cli\u003eVoltage: 240 Volts\u003c\/li\u003e\n  \u003cli\u003eAmperage: 8.3 Amps\u003c\/li\u003e\n  \u003cli\u003eWeight: 41 lbs\u003c\/li\u003e\n  \u003cli\u003eBTU Output: 6826\u003c\/li\u003e\n  \u003cli\u003eFan Speed: 1400 RPM\u003c\/li\u003e\n  \u003cli\u003eAirflow: 245 CFM\u003c\/li\u003e\n  \u003cli\u003eThermostat Range: 50°-90°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePowder coated bar stock steel tamperproof grille with extruded aluminum frame and 16 gauge housing\u003c\/li\u003e\n  \u003cli\u003eIn-built double pole tamperproof thermostat with positive off position\u003c\/li\u003e\n  \u003cli\u003eManual reset thermal limit switch for enhanced safety\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant steel tubular heating element with brazed steel fins\u003c\/li\u003e\n  \u003cli\u003ePermanently lubricated, unit bearing shaded pole motor with impedance protection\u003c\/li\u003e\n  \u003cli\u003ePropeller type fan blade for efficient air circulation\u003c\/li\u003e\n  \u003cli\u003eManufactured in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100134\/TPITPIE00374_3.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TPI","offers":[{"title":"Default Title","offer_id":45855802753249,"sku":"167603","price":2187.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/167603_image1_fae1afce-24b8-439d-916f-b6481feeef13.jpg?v=1787825943"},{"product_id":"spst-line-voltage-stat-for-5100-uh","title":"SPST LINE VOLTAGE STAT FOR 5100 UH","description":"\u003ch2\u003eSPST LINE VOLTAGE STAT FOR 5100 UH - Line Voltage Thermostat\u003c\/h2\u003e\n\n\u003cp\u003eThe SPST Line Voltage Stat for 5100 UH, manufactured by TPI (Model T5100), is a single-pole single-throw (SPST) pilot duty thermostat designed for use with 5100 Series Horizontal or Vertical Mounted Fan Forced Unit Heaters. It is suitable for line voltage control applications within electrical distribution and lighting solutions environments, particularly where precise temperature control is required for wire and cable protection or switchgear supplier installations.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eType: SPST, Pilot Duty Thermostat\u003c\/li\u003e\n  \u003cli\u003eAmperage Rating: 25 Amp\u003c\/li\u003e\n  \u003cli\u003eVoltage Range: 24-277V\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: 40-110 °F\u003c\/li\u003e\n  \u003cli\u003eManufacturer Part Number: T5100\u003c\/li\u003e\n  \u003cli\u003eProduct Weight: 2.0000 lbs\u003c\/li\u003e\n  \u003cli\u003eUPC: 686334692779\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for line voltage thermostat control in 5100 Series unit heaters\u003c\/li\u003e\n  \u003cli\u003eSingle-pole single-throw (SPST) switch for straightforward on\/off control\u003c\/li\u003e\n  \u003cli\u003eCompatible with pilot duty applications ensuring reliable switching\u003c\/li\u003e\n  \u003cli\u003eWide voltage range supports diverse electrical distribution requirements\u003c\/li\u003e\n  \u003cli\u003eTemperature range suitable for typical heating control settings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Links\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/images.tradeservice.com\/5T4OF9MVXVJA4GL0\/ATTACHMENTS\/DIR100361\/TPICorp-MarkelProductsCo_00005_17_CAT.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TPI","offers":[{"title":"Default Title","offer_id":45855838732513,"sku":"167765","price":258.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/9625\/4433\/files\/167765_image1_fcf3a27b-9137-4bcb-8424-0ba97e6c3d3b.jpg?v=1787826686"}],"url":"https:\/\/ulegroup.com\/collections\/wall-heaters.oembed","provider":"ULE Group","version":"1.0","type":"link"}